Shanghai Jorle Fine Chem Co., Ltd. >> Silicone Thermal Conductive Adhesive (ZR300(10-1))

Silicone Thermal Conductive Adhesive (ZR300(10-1))

Silicone Thermal Conductive Adhesive (ZR300(10-1))
Price: Negotiable
Trade Terms: FOB
Min Order: 1 /Piece
Pay Type: L/C,T/T,Western Union
ZR300 Thermal conductive epoxy potting gum is a room temperature/heating curing epoxy resin glue. ZR300 is used for design, protection of the potting need high strength or confidential electronic products.
ZR300 Bonding type organic silicon encapsulating glue used new technology without heating can well curing. When using press formulary scale thoroughly mix of A and B two components, products will form of elastic cushion material in a period of curing time.

After curing glue has the following characteristics:
Against moisture, dirt and other atmospheric composition
High strength
Easy to repair
Good adhesion performance
Has confidential role
Solvents, no cure by-products
Have stable mechanical and electrical properties between -50° C-250° C

A, B two components in proportion to remove mixing ratio, mixing, vacuum suction bubble in operation period, remove the potting products to casting, such as potting product is too big, suggest points potting, then according to The Times curing(80ºC/90min or 25ºC/10hr)

Operation caution:
Part A and sizing material place time is too long, will produce the precipitation, the proposal is in before taking: Will you please put A power mix separately, part B set period of time change color deep, this is normal phenomenon, do not affect use, after taking should pay attention to seal avoid light preservation.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
Temperature is too low will lead to curing speed partial slow, heat cure advice
ZR300 and contain N, S, P element of compounds and contact some heavy metal ion compounds, there will be difficult to cure or not curing phenomenon. These heavy metal ions including Sn, Pb, Hg, Bi, As, etc.

Packing:
Agent A: 10 kg/pail; Agent B: 10kg/pail

Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shelf life Agent A: 1 year, Agent B: 6 months(25ºC).
Conventional performance:
test item testing standard unit A B
Outside view visual inspection --- Black viscous liquid white viscous liquid transparent liquid
viscosity GB/T 10247-2008 mPa·s(25ºC) 5000±1000 3300±1000 200±50
density GB/T 13354-92 g/cm 3 (25ºC) 1.60 1.60 1.03
 
 
Operation process:
Test item Unit Value
Black White
mixture ratio weight ratio 100 : 10 100 : 10
mixture ratio volume ratio 100 : 14 100 : 14
Mixed viscosity mPa·s(25ºC) 3000±1000 2000±1000
Mixture density g/cm 3 (25ºC) 1.55 1.55
operation time min(25ºC) 60±20 65±25
curing time ºC/hr 60/0.5or 25/10 60/0.5or 25/10
Operation time is a quantity of cement with 100 g.
Typical performance:
test item testing standard Unit value
Black white
hardness GB/T 531.1-2008 Shore A 43±5 42±5
conductivity factor GB/T 10297-1998 W/mK 0.8
shear strength GB 6328-86 Mpa,iron/iron 1.0
expansion coefficient GB/T 20673-2006 μm/(m·ºC) 210
water absorption GB/T 8810-2005 (24h,25ºC)% 0.01-0.02
dielectric strength GB/T 1693-2007 kV/mm(25ºC) >25
Loss factor GB/T 1693-2007 (1MHz)(25ºC) 0.01
dielectric constant GB/T 1693-2007 (1MHz)(25ºC) 3.3
volume resistance GB/T 1692-92 (DC500V)Ω·cm 1.2×10 15
Remark : All the above data come from 25 ºC and 55% RH glue curing conditions after 7 days.
Prod Model: ZR300(10-1)
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Color: White
Material: Silicone
Classification: Room Curing
Characteristic: Conductive
Application: Electronics
Shanghai Jorle Fine Chem Co., Ltd., is a manufacturer of Silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, Power, Electronics, New Energy and other industries.

The company is located in Songjiang Shanghai, has completed the annual capacity of 2000 tons, organic silicon epoxy adhesive 500 tons, polyurethane adhesive 300 tons, organic silicone oil 1000 tons, high temperature resistant epoxy resin 200 tons of production scale. In recent years, new on the liquid silicone rubber and pharmaceutical intermediates project, reaching the company's product line.

The company has 50 employees, bachelor degree above for 70% of the total number. The company has established a long-term and stable cooperation with East China University of Science and Technology, Fudan University, Shanghai University, etc. Provide a strong technical support.

"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and social development. Our goal is "to be the best supplier of electronic industry, silicone industry outstanding enterprise".

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

"Science and technology light the passion of Jorle", Jorle is the courage to pursue, and continuously exceeded, and actively innovative science and technology enterprises, we will unswervingly to the integrity as a link, build confidence in the bridge, hold hands with you and work together.

Send your message to this manufacturer

  • Shanghai Jorle Fine Chem Co., Ltd.

More >

Other Products From This Manufacturer