PTFE product group:
PTFE+ glass fiber(5%-40%)
PTFE+ carbon fiber(5%-40%)
PTFE+ carbon(5%-40%)
PTFE+ Graphite(5%-40%)
PTFE+ Bronze(5%-50%)
PTFE gland packing
Antistatic PTFE products
PTFE ball
PTFE O-ring
PTFE tube&pipe
PTFE corrugated pipe
PTFE film
PTFE sheet
PTFE rod&stick
PTFE ball valve
Custom made PTFE products
We can produce all these PTFE products, no matter how special is your requirement, we believe that we can have good solutions for you.
PTFE skived sheet:
1. thickness: 0.5mm, 1mm, 1.5mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm
2. Wideth: 1000mm, 1200mm or customized
3. Roll length: 10M/roll or customized.
Quick Detail:
Outstanding chemical resistance glass filled PTFE sheet
Flame resistant and high temperature resistant
Different sizes available: 1000 x 1000mm, 1500 x 1500mm
SGS RoHS approved
Trade names:
PTFE skived sheet
Available Shapes:
Sheets, Rods, Tubes,Tapes, film
Color:
Natural White, black, red, green or customized
Sheets Thickness:
0.5-5mm
Size:
1000 x 10000mm, 1200 x 10000mm or customized
About PTFE Sheet & Rod:
PTFE resistant to practically every chemical known to man and has a surface as slippery as ice on ice to which no substance will adhere. PTFE will operate continuously at 260°C in harsh conditions for long periods. It will not degrade when exposed to long term sunlight.
PTFE is available in sheets, rods, tubes and plates in various different grades. Other forms of PTFE available include: glass filled and Skived Tapes.
Advantages:
Outstanding chemical resistance
Superb electrical insulating properties and high dielectric properties
Stability work in temperature range from 260°C down to liquid nitrogen temperatures (-260°C)
And a very low coefficient of friction, resulting in unique non-stick behavior
Lowest co-efficient of friction
Physiologically inert
Non-toxic
Key Features:
Unaffected by almost all chemicals
Continuous use at high temperatures
Slippery non-stick surface
Outstanding dielectric properties
Applications:
Seals
Seats
Packing
Chevrons
Piston rings, glide rings, lantern rings and back up rings
Slide bearings
Electrical and thermal insulators
Note: Usually, the color and length can be customized, width will according to the available extrusion mould or molding mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. More information, please feel free to contact us online or by email.
|
PTFE Properties Data Sheet |
|
Technical Data |
Method of Verification |
Unit |
PTFE |
|
Physical Properties |
|
Density |
ISO 1183 |
g/cm3 |
2.3 |
|
Water absorption |
ISO 62 |
% |
<0.05 |
|
|
|
Mechanical Properties |
|
Tensile strength at yield |
ISO 527-2 |
MPa |
25 |
|
Tensile strength at break |
ISO 527-2 |
Mpa |
- |
|
Elongation at break |
ISO 527-2 |
% |
>50 |
|
Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
700 |
|
Modulus of elasticity after flexural test |
ISO 178 |
MPa |
- |
|
Hardness-Rockwell |
ISO 2039-2 |
|
- |
|
Hardness - Shore D |
DIN 53505 |
|
55-60 |
|
Charpy impact strength at 23 C |
ISO 179 |
kJ/m2 |
N.B. |
|
Friction coefficient |
DIN 53375 |
|
0.08 |
|
|
|
Thermal Properties |
|
Heat deflection temperature - HDT/A |
ISO 75-2 |
C |
- |
|
Max. service temperature - Short term |
|
C |
260 |
|
Max. service temperature - Long term |
|
C |
260 |
|
Thermal conductivity at 23 C |
DIN 11359 |
W/(K*m) |
0.25 |
|
Coefficient of linear thermal expansion |
ISO 11359 |
10 -4* K -1 |
1.2 |
|
|
|
Electrical Properties |
|
Dielectric constant at 1 MHz |
IEC 60250 |
10 6 Hz |
2.10 |
|
Dielectric loss factor at 1 MHz |
IEC 60250 |
10 6 Hz |
0.0002 |
|
Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
>10 16 |
|
Surface resisively |
IEC 60093 |
Ohm (Ω) |
>10 16 |
|
Dielectric strength |
IEC 60243-1 |
kV/mm |
48 |
|
|
|
Miscellaneous Data |
|
Flammability |
UL 94 |
Class |
V-0 |
|
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |
|
|
|
|
|
|
Statement: |
|
|
|
|
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. ENERGETIC will not provide any legally binding guarantee of certain properties, or any suitability. |
Established in 2011 as a dedicated supplier of Engineering Plastics, Energetic is recognised as a leading supplier in the Chinese market, with a focus on Engineering and Industrial materials. Energetic has developed a reputation for service, quality and the ability to advise our customers on "right material with high cost-performance from China". Based on our own plant of POM extrusion, meanwhile the support of our professional manufacturers, Energetic brings to the worldwide market high quality rods, sheets, tubes and other specialty state-of-the-art plastic materials, which include
- Gerneral Plastic: HDPE sheets, HDPE rods, PP sheets, PP Rods, PVC sheets, PVC rods, ABS sheets, ABS rods, HIPS sheets, HIPS rods
- Engineering Plastic: POM sheets, POM rods, PTFE sheets, PTFE Rods, PA6 sheets, PA6 rods, PC sheets, PC rods, UHMWPE sheets, UHMWPE rods, PVDF sheets, PVDF rods
- High Performance Plastic: PPS sheets, PPS Rods
- Insulation Materials: Phenolic Paper Sheets, 3025 Phenolic Cotton Sheet, 3240/FR4 Epoxy sheets & rods, alternative Durostone Sheet CAS761
Our major warehouse is located in the Shenzhen, a seaside city, with a unequalled geographic advantage and mature logistic convenience, we are able to send these heavy cargos to our global clients by sea. We also support a network of distributors strategically located to service those needs of regional areas throughout all over the world.
With many years of experience in the plastics and engineering field, our able and dedicated staff member are qualified to solve your industry problems, answer your questions and satisfy your material needs.
