Solder Pallet Materials is a heavy-duty glass fiber reinforced plastic which offers extreme strength and excellent electrical, thermal and chemical properties. It is manufactured by using Polyester, Vinyl ester, Epoxy- and modified Epoxy resins combined with glass fibers.
It can keep its mechanical strength, smoothness and original color when continuously used under the temperature of 280 ° C (max. Working temperature below 360 degree 10~20sec). It is easily machining, high intensity and can be easily machining into special mechanical parts.
Application
Solder Pallet Materials is suitable to wave soldering and SMT process. It can achieve the precision required during the SMT machining process, and maintain its flatness in the reflow soldering cycle. The low thermal conductivity of the Solder Pallet Materials prevents heat-shrinkage of the bas board, to ensure the quality of reflow process. It is designed and typically recommended for use in manufacturing solder pallets for wave-solder applications of printed circuit boards.
The fixtures made from Solder Pallet Materials has the following functions, it can improve the efficiency of the peak soldering process:
Support thin baseboard or soft substrate circuit board
Carry an irregular shape solder pallet.
Use multi-pak panel design to improve production efficiency
Prevent the deformation of the solder pallet during high temperature reflow soldering process
Smoothly surface, good endurance, applicable for Teflon spray painting.
Avoid gold finger contamination by human contact.
Protect bottom side SMT components during the wave soldering process.
Prevent the deformation of the baseboard during the wave soldering process
Standardized the width of the production lines, eliminate the width adjustment of the production line
| Technical Data | RDS-001 | RDS-002 | RDS-003 |
| Grade | Standard | Anti-static | Anti-static and Optical |
| Color | Black | Black | Grey |
| Density(g/cm 3 ) | 1.87 | 1.87 | 1.87 |
| Flexural Strength(MPa)-perpendicular 3 point support(23°C) |
|
|
|
| 360 | 360 | 360 |
| Flexural Strength(MPa)-perpendicular 3 point support(150°C) |
|
|
|
| 180 | 180 | 180 |
| Coefficient of Linear Expansion(10 -6 / K)between30°C&200°C |
|
|
|
| 13 | 11 | 11 |
| Thermal Conductivity(W/m 0 K) |
|
|
|
| 0.25 | 0.25 | 0.25 |
| Surface Resistivity(ohms) | ____ | 10 5 -10 8 | 10 6 -10 8 |
| Standard Operating Temperature(°C) |
|
|
|
| 280 | 280 | 280 |
| Maximum Operating Temperature(°C),10-20 seconds |
|
|
|
| 360 | 360 | 360 |
| Thickness available(mm) | 2-30 | 2-30 | 2-30 |
| Thickness tolerance(mm) | ±0.1 | ±0.1 | ±0.1 |
| Size (mm) | 1020x1220
1220×2440 |
| Thickness (mm) | 3 to 150 |
Beijing Red Sun Composite Material Co., Ltd. is one professional producer for SMC and BMC molding products, insulating rigid laminates, rods and tubes, flexible composites, high thermal resistant products, gasket, fiber glass products, engineering plastics, etc. We also provide the further fabrication for these products and kinds of composite materials. You can get most of what you want from us.
Advanced production line, excellent technology and experienced work team assure we can provide you the products comply with the international standards and different requirements. We assure that you will get the high efficiency feedback and best service from us for those products that we deal with and certainly with the competitive price.
We have won customers from USA, Canada, Germany, Japan, and so on to be our partners, and more and more customers are joining us.
Red Sun Composite always takes the "Mutual Benefit", "Quality First" and "Better Ethics" as principle. Red Sun Composite will be your partner to success.
