Product Specifications
| Prod Model: |
DD862 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Type: |
Energy Meter |
| Display: |
Indicator |
| Measured Signal: |
Pulse Peak |
| Electric Equipment: |
Single-phase |
| Installation: |
Direct Connected |
| Power Meter Connection: |
Terminal |
| Theory: |
Induction Meter |
| Usage: |
Watt-Hour Meter |
Product Description
We have more than 10 years experience in exporting energy meter to southeast Asia and Middle East markets.
Introduction
Single Phase Glass/Transparent Energy Meter DD862
1. Meter case
The meter case meets the protection requirements set by IP52 of IEC60529, the series typs of case and terminal cover are available
2. Terminal
The conncton terminals are made of nickel plated brass with features of high mechanical strength good conductivity and corrosion resistance
3. Drive system
It has three electromagnet elements, each element consists of a voltage element and a current element, all of whch are mounted on the meter frame with two screws, voltage coil is enwrapped in a thermoplastic case to ensure fine insulation, in additionthe voltage element has a low load adjustment mechanisam
4. Roto
The roto disk is made of a hard and high puity aluminum, the rotor shaft is turned of high strength brass, there is a small hole on the upper end for storing lubrication and for fitting a brass bearing, the lower end is cone shaped to ensure fine guiding of the rotor
5. Braking element
The magnet cube is made of ALNICO5 alloy and designed as U shaped so that the effect of short time over currents upon the magnet is negligible a temperature compensation plate made of a special alloy is mounted outside of the magnet, the error of full load can be controlled precisely by turning the adjustment mechanism
6. Frame
The frame is die casted by high quality aluminum silicon alloy of stable property to avoid distortion, the application of static spray painting on the surface prevents the frame from oxidation
7. Upper bearing
The guide pin is made of abrasion proof stainless steel and embedded into the brass sleeve
8. Lower bearing
Both double jewel bearing and magnetic bearing are available
9. Register
The cyclometer type register consists of six drums, the kwh can be read directly. The drum is made of polycarbonate, the frame is made of hard aluminum alloy and can be manually adjusted and fixed with two screws to insure the proper mesh with the worm on the rotor shaft
Technical data
1. Meter type DT862
2. Accuracy 2.0 class
3. Current 1.5(6)A 2.5(10)A 5(20)A 10(40)A 15(60)A 20(80)A 30(100)A
4. Rating current of transformer in 5A directly connection
5. Reference voltage 3*57.7/100V 3*220/380V 3*230/400V 3*240/415V
6. Frequency 50Hz 60Hz
7. Power loss in voltage circuit 1.0W/5VA
8. Power loss in current circuit is less than 0.5VA
9. Starting current 0.5%Ib
10. Register: Cyclometer single, Unidirectional
Zhiming Group Co., Ltd., located along the sea in south zhjiang, wenzhou, liushi. Established in 1991, our factory mainly produces single phase, three phases mechanical electronic type kwh meters; Ge brand meter base, panel meter, low voltage shunt capacitors; High voltage shunt capacitor electronic components and etc.
In March 2001, we had passed ISO9001. "zhiming" brand products are now widely accepted by most clients. On the basis of hi-tech and modern management, our company is robustly developing and glowing up, marketing shares are more and more increased. In order to ensure and improve the quality, we have equipped with modern testing apparatus and excellent production technology and therefore continuously provided, with low price and best quality, dd28 dd17 dd862, dt862 series kwh meters, dds450 single phase electronic meters, ddsy ordtsy 450 electric with prepay fee. Dtsf 450 multi tariff kilo watt hour meter. Ge meter base, amper meter and voltage meter, bsmj low voltage shunt capacitors, bmh high voltage shunt capacitor, power relay, cj19 contactor for switching capacitors, AC contactors, mini circut breaker MCCB. Besides at maximum to meet with domestic marketing, our products are also exported southeast Asia, Russia and etc. Our company devote to building an integrated enterprise combined with tech research, industrial production and trading, on basis of "best quality, satisfactory services, hard research".
Under our topic of "true attitude, creation and innovation, perfect services", we honestly welcome all clients to make mutual development.
