Categories
Price: | US $ 1/Piece |
---|---|
Trade Terms: | FOB,CFR,EXW |
Min Order: | 100/Piece |
Pay Type: | L/C,T/T,Western Union |
Prod Model: | 8.5*8.5, 9.5*9.5, 12.7*12.7... |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Type: | Cutter |
Work Type: | Cut Off |
Material: | Kentanium |
ISO Code |
Grade |
Physical and mechanical properties |
Applications recommended |
||
Density g/cm 3 |
Hardness HRA |
Bending strength N/mm 3 |
|||
P30 |
YT5 |
12.5~13.2 |
≥89.5 |
≥1560 |
Best strength and high impact & shock resistance among W-Co-Ti alloys but wear resistance comparatively lower. Rough turning, rough planning and half precision planning of carbon steel and alloy steel (including forged steel parts. Stamping parts and cast iron surfaces). |
M10 |
YW1 |
12.7~13.5 |
≥91.5 |
≥1350 |
High red hardness, resistant to impact load. A goo grade for general purposes. Machining of ordinary steel, cast irons and hard to machining materials such as refractory steel, manganese steel, and stainless steel. |
M20 |
YW2 |
12.5~13.5 |
≥90.5 |
≥1460 |
Wear resistance second to YW1 yet strength comparatively higher and resistant to high impact load. Roughing and medium machining of ordinary steel cast irons as well as refractory steel, manganese steel, stainless steel and advanced alloy steel. |
P05 |
YT05 |
12.5~12.9 |
≥92.5 |
≥1260 |
Suitable for using in processing of hardened steel and high intension steel. |
P10 |
YT15 |
11.1~11.6 |
≥91 |
≥1300 |
Suitable for continuous and discontinuous fine cymbals and coarse and fine enlarge of carbon steel and alloy steel. |
P20 |
YT14 |
11.2~11.8 |
≥90.5 |
≥1400 |
Suitable for carbon steel, alloy steel processing, unsmooth section continuous coarse car, discontinuous fine and section coarse cymbals, core hole, coarse enlarge. |
P25 |
YS25 |
12.8~13.2 |
≥90.5 |
≥1780 |
Suitable for carbon steel, cast steel, high manganese steel, high strength steel and alloy steel rough turning, milling and planning. |
P30 |
YS30 |
12.6~12.9 |
≥90.5 |
≥1850 |
Suitable for large feed milling all kinds of steel products with high efficiency, especially suitable for alloy steel milling, gear hobbing. |
K10 |
YG6X |
14.8~15.1 |
≥91.0 |
≥1560 |
Suitable for coast and fine processing of cast iron, ball ink cast iron. |
K20 |
YG6 |
14.7~15.1 |
≥89.5 |
≥1670 |
Suitable for continuous cutting and coast car rib and core hole fine enlarge of cast iron and un alloy material. |
K30 |
YG8 |
14.6~14.9 |
≥89.0 |
≥1840 |
Suitable for discontinuous cutting and cutting cymbals of cast iron, ball ink cast iron, white iron. |
|
YT798 |
|
≥92.2 |
|
Good toughness, high thermal shock crack and the plastic deformation resistance. Suitable for milling alloy structural steel, alloy tool steel, high manganese steel, and stainless steel processing . |