Product Specifications
| Prod Model: |
ANS-380A |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Machine Size: |
1510×380×315cm |
| Wash Size: |
200*200cm |
| Total Power: |
35kw |
| Water Supply Tube: |
Dn40 |
| Water Consumption: |
160L Per Car |
| Wash Speed: |
up to 60 Cars/ Hour |
| Fuel: |
Electric |
| Certification: |
CE |
| Material: |
Metal |
| Condition: |
New |
Product Description
tunnel car washing machine ANS-380A
This tunnel car wash is used to carry out the hi-pressure wash, agent wash, brush wash, wax, drying and polishing for the surface of cars and various minibus. After a vehicle is sent into the wash room by conveyor, it first rinses away tiny grit and dust attached on the car completely by high pressure water, and then wash all-round the car by spraying foam and several sets of special wash brush, and finally it uses high pressure blowers and three sets of special polishing brush to dry and wipe the car, which makes the bright surface of car like a new one.
Feature:
Professional wash for Cars, jeeps and all kinds of minibus
Adopting advance technology and full module design, which can be combined to more than ten different functions for different needs
The main electrial components are imported from famous foreign factory, which can ensure safe and reliable.
Unique fault self-testing system.
Adopting the most advanced wash brushes which can wash completely
The transparent glass shape which is luxurious
Touch panel control screen is easy to operate
Adopting the advanced high pressure system
High pressure pre-wash, agent wash, brush wash, spraying wax, drying and polishing in one turn
Main optional equipment configuration:
One set of slab-oriented system
One set of rolling conveyor system
Three sets of high pressure water system
One set of soft wash system
Four sets of moving skirt brush system
One set of top brush
Four sets of side brush
Four sets of powerful blower system
Three sets of polishing brush system
Main configuration of control system:
Japanese Mitsubishi programmable control system
E-VIEW Chinese touch panel
Germany Turck infrared photoelectric sensor system
Japanese Omron detection devices
French Schneider Electric protection system
Taiwan Motor System
USA 030 dosing system
Fault self-detection system
Car wash counting system
auto / manual system
High pressure system delivers up to 550 psi blasts off dirt and debris. All the nozzles swing by three motors, no pressure loss.
Contouring dryer has been used for over twenty years. Blowers and vent are one-piece designed, profile the body of vehicle easily by three pairs of photo eyes. This means dryers are more efficient at delivering air pres-sure to the vehicle surface and re-quire fewer dryer motors to do the same work when compared to arch dryer.
|
MODEL |
ANS-380A |
|
Machine size(L×W×H) |
1510×380×315cm |
|
Wash size(W×H) |
200×200cm |
|
Conveyer length |
1570cm |
|
Bay size |
1680×400cm |
|
Electric standard |
3PH 380V 50Hz or 208~220/460V 60Hz |
|
Power |
35KW |
|
Water supply |
DN40 |
|
Water consume |
160L/vehicle |
|
Wash speed |
60 cars per hour |
|
Hi-pressure |
3 sets |
|
Wash brush |
12 sets |
|
Blower |
4 sets |
|
Wipe system |
√ |
|
Under carriage |
Customize |
Guangzhou Anisun Automotive Testing Equipment Co., Ltd. was founded in 2003. It is restructured by Chinese American Mr. Oliver Investment and Anisun in 2007, and set up a joint venture company in Guangzhou. We are researching and manufacturing vehicle testing equipment and testing controlling management system. Our main products includes computer wheel alignment, automobile chassis dynamometer, automobile brake tester, axle loading tester, side sliding tester, speedometer tester, suspension vibration tester, torque angle indicator, wheel partial tester, and so on. We are also sales agents for automobile testing equipments: Light detectors, gas analyzers, opacity smoke meters and other equipment.
Our factory is located in Jiangsu province; its area is more than 12000 square meter. It consists raw-materials workshop, finish machining workshop, welding workshop, treatment workshop, painting/baking workshop, assembling workshop, electrical and electronic controlling production workshop, and testing equipment workshop. We have special R& D department with a group of professional and technical staff.
