HJ-UPVC-WS001 granule product explanation
ZHEJIANG HANJIN PLASITC LIMITED COMPANY
Product introduction:
The HJ-CPVC-WS001 aggregate is suitable for the injection molding technique of production, to sail upstream the fitting general aggregate (also to be possible to use in other flinty injection molding product). The product has the good injection molding fluidity and superficial glossiness, and conforms to tap water health GB code.
Product characteristic:
Is suitable in the injection molding technique of production;Mainly uses in sailing upstream the fitting product (also to be possible to use in other flinty injection molding product);The Uygur card temperature (5100 weights) are bigger than 103ºC;Remarkable being flame-resistant performance.
Product physics target:
|
|
|
|
Project | Test criteria | Typical |
|
|
| value |
|
|
|
|
|
(g/cm3) | ASTM D792-00 | 1.44-1.54 |
|
Specific Gravity |
|
|
|
|
|
|
| ASTM D638-03 | 45Mpa |
Tensile Strength | (50mm/min) | 6980Psi |
|
|
|
|
% | ASTM D638-03 | 30 |
|
Tensile Elongation | (50mm/min) |
|
|
|
|
|
| ASTM D790 | 10000 Psi |
Flexural Strength |
|
|
|
|
|
|
| ASTM D790 | 310000 Psi |
Flexural MODulus |
|
|
|
|
|
|
|
|
|
|
Project | Test criteria | Typical |
|
| value |
|
|
|
J/m | D256-05 | 130J/m |
Impact Strength | (3.2mm/23ºC) |
|
|
|
|
ºC | ASTM1215-00 | 103ºC |
Vicar Distortion Temp | 3.2mm,120ºC/1h50N |
|
|
|
|
| UL94 | V-0 |
Flammability | 3.0mm |
|
|
|
|
% | 23ºC | ≤0.5 |
Mold Shrinkage |
|
|
|
|
|
|
| ASTM D2240 | 83 HD |
Degree of hardness |
|
|
|
|
|
Product packaging:
Outside wrapping knitting bag, each package of net weights 25±0.2Kg.
Special explanation:
In this product showing correlation data, is we the correlation data which obtains under the specific test condition, the customer in confirmed when product should act according to own use and the environment request confirms and the confirmation. We provide the correlation technique data only supplies in the customer use process to refer.
ZHEJIANG HANJIN PLASITC LIMITED COMPANY
Add: 1 Lvting Road, Dongcheng Development Zone, Huangyan, Taizhou, Zhejiang Province.