Categories
Price: | US $ 150-6500/Set |
---|---|
Trade Terms: | FOB,CFR,EXW |
Min Order: | 1/Set |
Pay Type: | L/C,T/T,Western Union,Money Gram |
Prod Model: | YLC-700 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Bactericidal Efficienc: | 98% Kill Total Coliforms |
Material: | Stainless Steel Ss304, Ss316 |
Medium Material: | PP (Propene Polymer) |
Lifespan Of UV Lamp: | 9000-12000 Hours |
Interface Type: | Flange or Thread |
Flow Rate: | 0.3--1000 Ton/Hour |
Alert System For Lamp: | One Set |
System Working Pressure Resistance: | (0.6 MPa)6kg/Cm2 |
Raw Water Supplying: | Running Water |
Brand Of Ballast: | Beasun |
Flow rate
Shortening or lengthening UV exposure time (dwell time) determines the effectiveness and use of a UV sterilizer. Adjusting the flow rate through the sterilizer controls UV exposure time. In general, larger organisms will need a longer dose of radiation than smaller organisms. For example, a UV sterilizer set at a higher flow rate is capable of controlling bacteria and free-floating algae but may not be effective against parasites. Reduce the flow rate through the UV sterilizer to lengthen the time parasites are exposed to the UV light. With a slower flow rate, the same unit can now be used to help control parasites.
Bulb age
Lamp effectiveness declines with time. Compared to when it was new, your UV sterilizer will no longer produce the same results after months of use. Therefore, you may have to increase the dwell time (by lowering flow rate) to produce desired results. Replace the UV bulbs every 6 months, or per manufacturer's recommendation, in order to maintain UV efficiency. Also, clean the quartz sleeve of the lamp regularly to remove organic buildup. A clean quartz sleeve allows better penetration of UV light and maximizes the efficiency of the unit.
How is a UV sterilizer installed?
The UV sterilizer should be the last piece of equipment in the system before the water is returned to the aquarium. It should be preceded by the biological and mechanical filters, and any chemical filter or heat exchanger in the system. Follow the manufacturer's directions on installation. Most units use hose barb connectors to attach to the appropriate water pump or are designed to allow add-on connectors as a PVC slip fit or hose barb attachment.
What is the proper maintenance schedule for UV sterilizers?
The quartz sleeve will need to be checked monthly and removed and cleaned with rubbing alcohol. Some larger UV sterilizers have wiper mechanism units installed for easier maintenance.
For most units, the UV bulb will need to be replaced after 6 months of continuous use, however, this time may vary so be sure to follow the manufacturer's recommendations. When installing or changing a bulb, never look directly at the bulb when the unit is turned on. Doing so can result in permanent damage to your eyes. (The damage can occur without you feeling any discomfort.)
Always disconnect the unit from the electricity when performing maintenance to protect against possible shock. When turned on, the bulb becomes especially hot when in the air and submerging it in water may cause it to break.
model | Processing capacity (Ton/Hour) | power (W) | inlet and outlet (inch) | working pressure (Kg/cm 2 ) | malfunction alert for UV lamp | reactor dimension (cm) L×W×H | dimension of panel(cm) | anchor bolt (cm) | overall weight (Kg) |
YLCn-005 | 0.3 | 16 | 1/2" | 6 | matched | 30×6×11 | 5 | ||
YLCn-008 | 1 | 25 | 1/2" | 6 | matched | 47×6.3×11 | 10 | ||
YLCn-050 | 2 | 40 | 1" | 6 | matched | 100×9×20 | Φ8.9×25 (diameter×length) | 69×4×Φ1 | 25 |
YLCn-150 | 6 | 80 | 1+1/4" | 6 | matched | 100×11×23 | 69×4×Φ1 | 30 | |
YLCn-200 | 8 | 120 | 1+1/2" | 6 | matched | 100×15.9×30 | Φ8.9×45 (diameter×length) | 69×7×Φ1 | 35 |
YLCn-300 | 12 | 160 | 2" | 6 | matched | 100×15.9×32 | 69×7×Φ1 | 40 | |
YLC-050 | 2 | 40 | DN25/1" | 6 | matched | 100×8.9×30 | 25×30×12 (L×H×w) | 60×4×Φ1 | 45 |
YLC-150 | 6 | 80 | DN32/1 1/4 " | 6 | matched | 100×10.8×30 | 60×4×Φ1 | 50 | |
YLC-200 | 8 | 120 | DN40/1 1/2 " | 6 | matched | 100×15.9×40 | 60×7×Φ1 | 60 | |
YLC-300 | 12 | 160 | DN50/2" | 6 | matched | 100×15.9×40 | 60×7×Φ1 | 70 | |
YLC-360 | 15 | 200 | DN65/2 1/2" | 6 | matched | 100×15.9×40 | 50×78×25 (L×H×W) | 60×7×Φ1 | 120 |
YLC-500 | 20 | 240 | DN65/2 1/2" | 6 | matched | 100×21.9×50 | 60×11×Φ1.2 | 130 | |
YLC-600 | 25 | 280 | DN80/3" | 6 | matched | 100×21.9×50 | 60×11×Φ1.2 | 140 | |
YLC-700 | 30 | 320 | DN100/4" | 6 | matched | 100×21.9×50 | 60×11×Φ1.2 | 150 | |
YLC-1000 | 40 | 360 | DN100/4" | 6 | matched | 100×21.9×50 | 60×11×Φ1.2 | 160 | |
YLC-1200 | 50 | 400 | DN125/5" | 6 | matched | 100×21.9×50 | 60×11×Φ1.2 | 180 | |
YLC-1500 | 60 | 420 | DN150/6" | 6 | matched | 170×27.3×57 | 120×16×Φ1.4 | 210 | |
YLC-2000 | 80 | 560 | DN150/6" | 6 | matched | 170×27.3×57 | 120×16×Φ1.4 | 220 | |
YLC-2500 | 100 | 700 | DN150/6" | 6 | matched | 170×27.3×57 | 60×128×30 (W×H×T) | 120×16×Φ1.4 | 275 |
YLC-3000 | 125 | 840 | DN150/6" | 6 | matched | 173×27.3×57 | 120×16×Φ1.4 | 300 | |
YLC-4000 | 150 | 1120 | DN200/8" | 6 | matched | 173×32.5×65 | 120×20×Φ1.6 | 325 | |
YLC-5000 | 200 | 1400 | DN200/8" | 6 | matched | 173×37.7×72 | 120×22×Φ1.6 | 350 | |
YLC-7000 | 300 | 2100 | DN250/10" | 6 | matched | 175×42.6×80 | 120×24×Φ2.0 | 400 | |
YLC-10K | 400 | 2520 | DN250/10" | 6 | matched | 176×52.9×95 | 60×150×40 (W×H×T) | 120×28×Φ2.2 | 475 |
YLC-15K | 600 | 3080 | DN300/12" | 6 | matched | 176×78×110 | 120×32×Φ2.4 | 600 | |
YLC-20K | 800 | 3920 | DN350/14" | 6 | matched | confirmed | confirmed | confirmed | confirmed |
YLC-25K | 1000 | 4760 | DN350/14" | 6 | matched | confirmed | confirmed | confirmed |