Wine Filling Machine Beverage Filling Machine (CGF18-18-6)

Beer bottling machine
Automatic glass bottle beer bottling machine
DCGF series 3-in-1 filling mono-block is composed of rinser, filler and capper, which adopts and absorbs advanced technology and is manufactured according to beer production technical requirement. It uses balance pressure filling method with vacuum process and CIP cleaning function.

Bottle In-feed
1) The clamp heads use special design clamp head for the glass bottle
2) The convey chain used stainless steel 304 material for long time use.
Bottle Washing machine
3) The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4) The rinser is driven by driving system positioned inside machine frame via gear transmission.
Bottle filling machine
1) Balance filling method.
2) Filling valves are made of SUS316L.
3) Long-tube filling valves are adopted, with CO2 fully exchanging with air inside glass bottles, to decrease the rinsing of oxygen effectively.
4) High-pressure foam stimulator is equipped to minimize air remaining at the neck.
5) Centralized automatic lubrication system, simple for maintenance.
6) Before capping system, we have jetting system to remove the beer foam on the top of bottle mouth to be sure the Oxygen content less than r0.15 mg O2/l
7) Filling level tolerances: ± 2.0 mm
8) Bottle break rate: Max. 0.01% (1: 10, 000)
Bottle capping machine
1) Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
2) Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
3) The capper is equipped with inlet bottle detection switch.
4) Centrifugal way of cap arranging is adopted to reduce damage of caps.
5) A cap inspecting system is applied to control on-off of cap elevator.
Discharge conveyor
1) Driving motor is frequency inverted to synchronize with the filling line to prevent bottles from falling.
2) Discharge conveyor is equipped with photocell switch to slow down and stop filling line in case of fallen bottles.
Machine frame
1) The machine frame is a welded structure of high quality stainless steel and carbon steel with the surface anti-rust treated and coated. The machine frame is wrapped with stainless steel sheet (SUS304).
2) Driving system of the 3-in-1 Unit is positioned under the machine table. One main motor provides driving power via gear transmission.
3) The gear transmission system is an interleaved arrangement of steel gears and nylon gears.
4) The output shaft of the main motor is equipped overload protection to secure machine safety.
In-dependent Electrical control box
The electrical cabinet is made of SUS304 stainless steel. From bottle in-feed to bottle discharge, a PLC controls the fully automatic operation of the 3-in-1 Unit.

Model	CGF18186
Heads of washing, filling, sealing	18-18-6
Production capacity(bottle/hour)	5000-7000
Suitable bottle height/diameter(mm)	H=170-320,φ=50-100(330-1500ml)
Spraying pressure(MPa)	0.25-0.3
Total Power(KW)	3.18
Overall dimension(L×W×H)	3012×2012×3260
Weight	3800
Filling level tolerances	± 2.0 mm
Bottle break rate	Max. 0.01% (1: 10, 000)

Packaging & Shipping
Packaging: International standard export package;
Shipping: 30 working days after receiving 30% deposit of total amount of contract or irrevocable L/C at sight.
  

Our Services
The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
3.If we get the permission of the customer who has brought the machines from us,we can tell you our customers' contact imformation,you can go to vist their factory.
4.We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
After-sales service
1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
3.We provide one year warranty with spare parts free 

Company Information
  
 
Company Management
Our company has different departments to finish different things,the sales in our company has been trained about the machines ,they are professional to help you.
Quality Control
We have the single quality department,that make sure the material of the raw materials is good,and ensurethe machine running smoothly.
Designed and developed
According to the customer's requirements,and the beverage industry's development, The designing department design the most suitable machine for different area.The designing department make our company the leader of the beverage packing machine manufacture.
Export market
Our machine has been sold to more than 40 countries,almost of the customers are satisfied with the machines and our service.