19" Inch Aluminum Electrical&Electronic Equipment/Instrument Enclosures (C-9)

. Advanced and robust design
. Used in desktop&rack-mounted electrical equipment
. Powder coated, elegant and graceful

Series A
Introduction
. International advanced design and technique; Widely used in industrial control, communication, electrical industry, testing system, network control center, military electrical industry, distributing control system; Can be integrated into high density electrical equipments.
. Widely suited in desktop or rack-mounted electrical equipment; Solid structure; Excellent load-carrying capacity
. Can be inner fixed international standard board
. Powder coated on surface, elegant and graceful in appearance

Handle

A (desktop)
B(rack-mounted flange)
BM fix flange (evolved by series B eliminated handhold part)
AL front flange (evolved by series A eliminated handhold part)
Notes:
. Die-Casted by Aluminum alloy; Polished and plastic sprayed on surface
. CI A/B is standard enclosure of this series (series A is desktop style, B is rack-mounted style)
. Series A/B can be evolved into above four schemes; Handle style can be freely selected, and keep other structure unchanged

Side plate

Notes:
. Side plate is casted by extruded aluminum alloy; Plastic sprayed on surface (also can be treated with conductive oxidation on one side)
. Left& right panel can be replaced by cooling hole plate or side plug-in board (except 2U)
. Left& right panel can be punched plum-shaped cooling hole (should be noted in the purchasing order)

Threaded insert and slide nuts

Notes:
. Can be inserted front& rear beam to fix the panel
. Thread hole is M 2.5
. The holes spacing is 5.08mm

Case foot

. Made by PC Injection molding; Matt surface; 3 kind is available (small& big standing leg, round leg)
. Each case has two standing leg and a pair of round leg as accessory.
. Load-carrying weight is about 25KG; Big standing leg can be selected according to the weight
. Different foot is available by different requirement.
. Round sucker leg can carry heavy carrying weight, sucker can prevent from slipping

Connection Scheme for standard board and guide rail

Length of plastic guide rail
LC(mm) 143 210
Lh(mm) 123 183

Height of circuit board
H 2U 3U 4U
P(mm) 55 100.5 145
Notes:
. Two forms: Plastic and aluminum
. Plastic guide rail has two kind of length: 140mm and 210mm; Aluminum guide rail's length is free
. Plastic guide rail is made by PC injection molding

Connection between the base cover and left& right side plate

Notes: . 1.5 or 2mm aluminum board
. 2 kind of assemble methods
. Plate board fixed on front& rear beam
. U shape board fixed on left and right side plate

Dimension
Table1 (plate board) u(mm)× V(mm)
Beam length
Case depth 42HP 63HP 84HP
180mm 215× 161 322× 161 429× 161
240mm 215× 221 322× 221 429× 221
300mm 215× 281 322× 281 429× 281
320mm 215× 301 322× 301 429× 301
360mm 215× 341 322× 341 429× 341
Table2 (U shape) l(mm)× S(mm)
Beam length
Case depth 42HP 63HP 84HP
180mm 218× 96 325× 96 432× 96
240mm 218× 156 325× 156 432× 156
300mm 218× 216 325× 216 432× 216
320mm 218× 236 325× 236 432× 236
360mm 218× 276 325× 276 432× 276

Reference for order

1 Top cover
2 Rear horizontal rail
3 Slide nuts
4 Rear foot
5 Rear trim
6 Decorative panel
7 Side panel
8 Base foot
9 Base cover
10 Horizontal rail
11 Handle

Notes:
. INluding all fastening piece
Items With *re optional accessories, should be ordered separately
Round sucker legs should be noted in the order if required
Each standing leg has two parts
If carrying loaded required, bottom tray or center horizontal rail can be selected