Electronic Weigh Bridge (SCS-120)

1. Its longitudinal beams compose of over 5 U-shaped beams made of Iron Q235, which provides overall strength and rigid support for scale platform and structure;
2. Outer cover is painted with marine paint--epoxy zinc rich primer and anticorrosive coat paint, which can prevent scale from acid, alkali and corrosion;
3. Weighing signal sent by digital Load cell is at 4v stronger which can make sure a distant transmission and has a good ability of anti-jamming;
4. Pit foundation type is durable for long-term use; While pit less foundation type is convenient to install and uninstall, and easy to move from one place to another;
5. Accuracy UPS to OIML III, tested by National Bureau of Quality and Technical Supervision of China.

Functions:
Able to connect with digital load cell
Auto/manual angle correction
With correction mode for static railway scale
Digital load cell communication address modification function
Single load cell and single angle data check function
Call and display inner code to replace weight observing and analysis tolerance
Able to set up zero-tracking range, zero (auto/manual) range
With bi-divisions switch function
Non-linearity correction and calibration tolerance correction
Time power-off function
Able to set up print function for fast filled weighing bill
Weighing data save/check/delete/protection in case of power off
Standard RS232C (RS422/RS485 optional) communication interface with selectable baud rate
Standard scoreboard interface with 20mA current loop method
Standard parallel print interface
Able to save 1500 vehicle ID and corresponding tare weight, 201 cargo ID and corresponding cargo name, 1001
Able to print out various parameters of indicator

Standard parts
Load cell: 8 or 10 sets
Indicator: 1 set
Cable: 30m

Selective parts
Computer: 1 set
Printer: 1 set
Ramp: 1 or 2 sets
Guardrail: 2 sets