Categories
Price: | Negotiable |
---|---|
Min Order: | 1 |
GREEN LEAF CHEMICAL LIMITED | |||||||
GREEN LEAF Handbook of industrial protective coatings |
Iron oxide red epoxy ester primer , epoxy ester zinc yellow primer EPE 312 |
||||||
Application | Iron oxide red epoxy ester primer for ferrous metal surface, and epoxy ester zinc yellow primer for aluminum-magnesium alloy surface, these two primers and phosphate primer, can increase salt spray resistance of the film,anti-rust performance, this primer can form a good coating adhesion and toughness. | ||||||
Products Introduction | Made from epoxy resin, vegetable oil acids, fillers, catalysts, anti-rust additives, xylene, butyl alcohol, red iron oxide or zinc yellow and so on. | ||||||
Product data | Solid volume | 33.3% | |||||
Dry film thickness | 40microns wet film thickness equal to 120 microns | ||||||
Theoretical spreading rate | 6.1m2/kg | ||||||
Practical Coverage | Allow appropriate loss | ||||||
Works described in detail | Mixing ratio | Single canned | |||||
Construction method | |||||||
Airless spray | Recommended use: Tip range 0.30 ~ 0.53mm, the vent of hydraulic pressure can not be less than 17.6MPa (176kg / cm2) | ||||||
Brush or roller | Recommended | ||||||
Conventional spray | Not recommended | ||||||
Thinner | BW 103 maximum dilution volume: <5% | ||||||
Paint equipment cleaning agent | BW103 | ||||||
Use of | No limit | ||||||
Shelf | One year | ||||||
Drying time | |||||||
Substrate temperature | Surface dry (h) | Completely dry (h) | Repeat brushing interval | ||||
The shortest | The longest | ||||||
25degree centigrade | 2 | 24 | 4h | No limit | |||
Storage and management | Storage | Store in a cool and dry environment. | |||||
Packing |
25kgin the 20 litre container |
||||||
Flash point | 30 degree centigrade (mixture) | ||||||
Proportion | 1.3~1.4 kg / liter | ||||||
Technical requirements and surface treatment | New steel: sandblasted to Swedish standards Sa2.5, if you need temporary protection, use the appropriate shop primer, remove the damaged shop primer and dirt completely before painting | ||||||
Restriction |
Suggested painting number: two high-pressure airless spray, dry film thickness of 80 microns. Support, after coating: epoxy paint, chlorinated rubber paint, alkyd resin coatings, chlorosulfonated polyethylene coatings. |
||||||
Safety measures | See“Summary of Paint" |
Prod Model: | GLC-EPE312 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Use: | Appliance Paint |
Level: | Finish Coat |
Substrate: | Steel |
Appearance: | Liquid |
Method: | Spray, Brush or Roller |