Categories
Price: | US $ 470-500/Piece |
---|---|
Trade Terms: | FOB,CIF,EXW |
Min Order: | 1/Piece |
Pay Type: | L/C,T/T,D/P,Paypal,Money Gram |
Cartridge filter, also known as security filters, generally set before the pressure vessel to remove the tiny particles whose turbidity above 1 degree, to meet the requirements of the follow-up process of water; sometimes, it is also set at the end of the entire water system to prevent small particles (such as broken resin) into the finished water.
Cartridge filter housing Working Principle
Cartridge filter, also known as security filter. The shell is made of high quality stainless steel, filter using molded filter, The liquid went through filter under pressure, residue left on the filter, and the filtrate outflow through the filter can effectively remove impurities in the water, sediment and suspended solids, bacteria.
Molded filters are: cloth, screen, filter, sintered filter tube, wound filter, melt-blown filter,
micro-porous filter and multi-function filter.
Due to different filter, the filter pore size is not the same. Precision filter is between the sand filter (coarse) and a filter between ultra-filtration, filter pore size generally between 0.01-120um.For the same form of filter,it is divided into different models by their dimensions.
Commonly used wound filter and meltblown filter
Wound filter (also known as honeycomb filter), there are two types: one is polyp
ropylene fiber - polypropylene skeleton filtration, the maximum temperature 60 ºC;
the other is cotton fiber - stainless steel frame filter, the maximum temperature 120 ºC.
Raw material of meltblown filter is polypropylene, the maximum operating temperature is 60 ºC.
Sophisticated filters can remove suspended solids, colloidal substances and some fine particulate
matter and so on.
Cartridge filter housing Composition
Cartridge filter is mainly composed by the filter housings, filter cartridges and other components,
and the filter housings materials is mostly made of R304 stainless steel, if it's used in the acid and other special occasions,it will be made by R316 stainless steel. It an be divided into the flange and clamp, and flanged housing is mainly used in the occasion of larger flow filtration. The filter is mainly made by PP cotton, it can also be made by wound filter or activated carbon filter on some occasions. The number of filter may vary from 1 to dozens, primarily be determined from the water flow rate.
DETAILS
Cartridge filter housing Application
1, Food industry:fine filter of space water, mineral water,beverages, liquor clarification and filtration process.
2, Pharmaceutical industry: sterile water, oral, infusion and injection water treatment.
3, Electronics industry: water preparation semiconductors, instruments, picture tubes and other production plants, wash water filtration bar.
4, Chemical industry: organic solvents, esters, alcohols, acids, alkalis and other chemicals, oils purification.
5, Oil industry: oil field water injection preparation and so on.
6, Environmental protection, electroplating wastewater, printing waste, pharmaceutical waste and other industrial wastewater treatment.
7, Seawater, brackish water desalination water treatment, hotels, apartments water treatment.
8, Precision filter is often used as security filter for electrodialysis, ion exchange, security filters reverse osmosis devices.
Parameter Cartridge filter housing
Working pressure: | 0.6 / 1.0 / 1.6Mpa |
Body Material: | Stainless steel (SUS304, SUS304L, SUS316, SUS316L). |
Operating temperature: | 5 ~ 40 ºC (exceed 60 ºC to be informed) |
Design temperature: | 5 ºC -100 ºC |
Replace the pressure: | 0.05Mpa-0.07MPA |
Filter interface: | flat compression, plug-in |
Cylinder and base connection mode: | quick opening, flanged |
Filtration accuracy: | 1μm ~ 100μm |
Cartridge Quantity: | 1 core to 180 cores |
Filter Length: | 10 "~ 40" |
Seal type: | O-ring or flat washer |
Seal Material: | PTFE, rubber. |
Outside treating : | matte jet beads, mirror electrolytic polishing. |
Sealing material: | nitrile rubber, silicone, Viton, standard configuration for the silicone seal. |
Interface Type: | GB, HG, DIN, ANSI, JIS standard flanges, dental mouth, clamps and so on. |
Flange Standard: | GB, HG, SH, HGJ, JB, ANSL, JIS and other standards. (User-specified, please indicate the pressure level) |
Manufacturing, testing standard: | GB150 standard, or user-specified criteria. |
Cartridge filter housing Characteristics
1, high filtration precision, uniform pore size filter.
2, small filtration resistance, flux, interception capability, long service life.
3, filter is clean and no second pollution to the filter media.
4, It also can filter acid, alkali and other chemical agents.
5, high-intensity,heat-resistant,deformation resistance.
6, low price, low running costs, easy to clean, filter can be replaced
Material of filter | temperatureºC | Pressure(Mpa) | precisionμm | size |
Sintered titanium alloy filter | ≤300 | 0.015 | 0.3~100 | Φ50×120 Φ50×450 Φ60×110 |
Stainless plait filter | ≤500 | 0.01 | 2~180 | Φ35×210 Φ65×250 Φ86×350 |
PTFE plait filter | ≤140 | 0.011 | 0.02~50 | Φ45×250 Φ45×500 Φ45×1000 |
PP plait filter | ≤60 | 0.012 | 0.1~60 | Φ45×250 Φ45×500 Φ45×1000 |
Metal fiber sintered felt | ≤130 | 0.01 | 1~70 | Φ180×425 Φ180×800 |
Ceramic filter | ≤250 | 0.018 | 0.4~80 | Φ100×300 |
Melt-down filter | ≤60ºC | 0.015 | 1-100 | Φ60×250 Φ60×500 Φ60×750 Φ60×1000 |
Wound filter | ≤60ºC | 0.012 | 1-100 | Φ60×250 Φ60×500 Φ60×750 Φ60×1000 |
Cartridge filter housing Types of filter
Types | Size (um) | Working temperature(ºC) |
Plait filter | 0.1 0.2 0.5 0.8 1 2 3 5 7 8 10 20 30 50um | <60 |
Microporous tube(PE) | 5-10 10-15 15-20 20-25 25-30 etc., | <80 |
Joint microporous | 0.2 0.3 0.45 0.6 0.8 1.0 | +5-40 |
Wound filter | 1,5,10,20,30,50,100 | ≤60 |
Melt-down filter | 1,5,10,20,30,50,100 | ≤60 |
How to choose the correct model
Ultrafilter often disposed after the pressure filter for removing fine particles in a liquid, the water in order to meet the requirements of the subsequent process. Sometimes a full water treatment system is also set in the end, to prevent small particles from entering the finished water.
The filter has a honeycomb core common and meltblown filter. Filter precision micrometer (um) dollars, are the following specifications: 0.5 0.8 123,451,020,305,075 100 to be selected according to different requirements.
Cartridge filter housing Attention
1, You should prevent pressure surges, prohibit reverse pressurization.
2, when the pressure difference between upstream and downstream flow is significantly larger than 0.05Mpa or decline, you should consider replacing the filter.
Cartridge Filter housing Parameter- Small Flow Rate with hoop cover
Model | Filter ΦD | Inlet height A | Outlet height B | Total H | PipeΦ | (m³/H) |
JLQ1-10" | Φ 108 | 90 | 45 | 380 | 1" | 0.5 |
JLQ1-20" | Φ 108 | 90 | 45 | 650 | 1" | 1 |
JLQ3-10" | Φ 160 | 120 | 245 | 500 | 1" | 1.5 |
JLQ1-20" | Φ 160 | 120 | 45 | 700 | 1" | 3 |
JLQ5-10" | Φ 200 | 120 | 45 | 500 | 1.5" | 2.5 |
JLQ-5-20" | Φ 200 | 120 | 45 | 740 | 1.5" | 5 |
JLQ5-30" | Φ 200 | 160 | 60 | 1010 | 2" | 7.5 |
JLQ5-40" | Φ 200 | 160 | 60 | 1290 | 2" | 10 |
JLQ7-10" | Φ 230 | 160 | 60 | 500 | 1.5" | 7 |
JLQ7-20" | Φ 230 | 160 | 60 | 760 | 1.5" | 7 |
JLQ7-30" | Φ 230 | 160 | 60 | 1030 | 2" | 10.5 |
JLQ7-40" | Φ 230 | 160 | 160 | 1310 | 2" | 14 |
Prod Model: | JLQ |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Filter Precision: | 1-100 Microns |
Airproof Type: | O-Ring and Washer |
Suitable: | Plain 222 and 226 Socket |
Design Pressure: | 0.75_1.6mpa |
Design Temperature: | 20~120 Degree |
Voltage: | 220V50Hz |
Brand Name: | Peide |
Application: | Water Filter |
Condition: | New |
Product Model: | Jlq |
Type: | Mesh Filter Bag |
Usage: | Water Filter |
Filtration Grade: | Medium Filter |
Material: | 304ss or 316L |
Medium Material: | Particulate Matter |