Product features
1. Water-based and environmental product.
2. Has strong cohesive force.
3. With "breathing" function, waterproof but breathable.
4. It is suitable for all types of tile or boards.
5. The waterproof layer doesn't need the protective layer.
Scope of application
1. Waterproofing for indoor and outdoor concrete structures, precast, brick and other lightweight substrate.
2. The external wall, roof, floors, including tunnels, bridges, basement, pool, balcony, kitchen, bathroom, etc., especially around the nozzle, then angle part.
Treatment of base plane
1. Base plane must be firm, smooth, and free of dust, grease, release agents, batik materials and so on.
2. All the small gaps and trachoma can be filled by paste which is mixed with powder with a small amount of water.
3. The exterior and internal angle should be fillet.
4. Leakage phenomena should be disposed firstly, and then start further waterproofing.
5. Base plane should be pre-wet, and be constructed after no clear water. That the construction could be faster, smoother; Construction efficiency could be improved, material costs could be saved.
Construction technology
1. Pour the powder into the additive in proportion, stir until get even and no end groups' paste. After standing for 5 minutes could get the better stirring effect.
2. According to construction requirements determine the number of times, generally impervious and moisture paint 1-2 times, water proofing paint 2-3 times. It is better to paint by crossways.
3. After the first pass completion of the construction, should wait it is almost dry, or non-stick hand, and then construct a second time, usually at intervals of 2 hours.
4. If it takes too long to dry the first layer, the construction should start after wetting the base plane and without clear water.
Attentions
1. Well-mixed sizing agent should be used within 2 hours, if it comes dry don't add water and reuse.
2. Construction should be done from 5 to 40, cannot be done under 0 or rain.
3. Within 24 hours of completion of the construction, should to prevent human trampling, sharp objects, light rain, frost and so on which will damage the waterproof layer.
4. Provide ventilation installation when construct in poorly ventilated or enclosed environment.
5. The air blower is not allowed to use to shorten curing time of the waterproof layer.
6. Waterproof product should be kept in a cool and dry place, away from direct sunlight and rain water.
Storage period
Keep in a cool and dry place, unopened product is valid for 1 year; Additive is valid for 6 months.
|
Technical parameters |
|
|
|
|
|
|
|
|
|
Product name |
Solid content % |
Tensile strength (Mpa) |
Breaking elongation rate % |
Water impermeability (0.3MPa, 30min) |
Cohesive strength (MPa) |
Impermeability (MPa) |
Mixing rate powder: Agent |
Usage kg/m² /mm |
|
YY-921 (I type) |
≥ 70 |
≥ 1.2 |
≥ 200 |
Impermeability |
≥ 0.5 |
_____ |
25:20:00 |
1.7-2.0 |
|
YY-922 (II type) |
≥ 70 |
≥ 1.8 |
≥ 80 |
Impermeability |
≥ 0.7 |
≥ 0.6 |
25:17:00 |
1.7-2.0 |
The brand of "Yunyan" was established in 1993. Our headquarter is located in Guangzhou, Guangdong. As the leader in special building materials industry, "Yunyan" series of special building materials are sold well for many years in China and around the world. By virtue of stable quality, we obtain lots of customers' extensive approval.
Since 2000, by means of the technical accumulation in the field of special building materials' R&D for 20 years, as well as to comply with our country's industrial policy of environment protection and energy saving, our company has invested over half of our technical forces on the R&D and marketing for polymer dry powder series, such as tile adhesive, grout, wall putty, texture coating, concrete floor sealant, self-leveling cement and thermao insulation mortars...
Nowadays, our yearly capacity is nearly 50, 000 tons in the high quality special building materials. The capacity and the market share are both stand in the front rank of the industry.
