YUNYAN tile grout is good strength and weather resistance, non-shrinkage, waterproofing. It is the ideal senior filling agent for pasting veneer stone, ceramic tile joint.
Product features
1. Good Strength, Non-shrinkage, incrust, never depart
2. Anti crack, anti penetration, anti mildew
3. Anit-UV, Anti-aging, long last color, Environment friendly, non-toxic, anti-mould
4. Coloured, many colour can be chose.
5. Reduce the sag which has bad incluence on the decorativeness.
Scope of application
Suitable for the joint filling of tile layed on both on wall and floor for interior and exterior wall.
Treatment of base plane
Tile joint: Make sure that the joint clean, free of crumb or water. For porous tile such as clay tile, art tile. Wet the joint first.
Construction technology
Put the powder together with clean water into a big bucket and mix well. Powder: Clean water = 10kgs: 2kgs. Mix with electric mix until the slurry is enven. Reduce or increase water according to actual situation.
Fill the slurry into the joint with knife. Do not leave hollow.
Clean the surface with cloth wet with clean water. For those coarse tile surface which are difficult to clean, use ceramic tile detergent.
Attention
1. The working and construction temperature should be 5 -40 oC. No rain fall.
2. For those ceramic tile with coarse surface, prior filling test is needed to avoid un-thorough cleaning after application. Apply craft of seam treatment if necessary.
3. The mixed adhesive should be used up within 3~4 hours. The skin layer should be removed before use. Never mix again with water and use again without removal.
4. Keep from rain or touch within 3 hours after laying.
Dosage
The amount needed according to the width, deepth and the sizes of ceramic tile, which can be calculated according to the following (kg/sqm)
(tile length × Tile width)× Joint width× Joint depth× (1.8-2.0)
G= tile length + tile width
Marks: Length unit is mm
Usage depend on tile size, thinkness and joint seam.
Storage period
12 months from the date of manufacture stored in a dry place in original un-opened bag
Spec.
25 kgs/bag or 2kgs/bag
Technical Specification
|
Abrasion Resistance/mm 3 |
< 2000 |
|
Shrinkage/ mm/m |
< 3.0 |
|
Modulus of Rupture/Mpa |
> 2.5 |
|
Compressive Strength/Mpa |
> 15 |
|
Water Absorption(g) 30 minutes |
< 5.0 |
The brand of "Yunyan" was established in 1993. Our headquarter is located in Guangzhou, Guangdong. As the leader in special building materials industry, "Yunyan" series of special building materials are sold well for many years in China and around the world. By virtue of stable quality, we obtain lots of customers' extensive approval.
Since 2000, by means of the technical accumulation in the field of special building materials' R&D for 20 years, as well as to comply with our country's industrial policy of environment protection and energy saving, our company has invested over half of our technical forces on the R&D and marketing for polymer dry powder series, such as tile adhesive, grout, wall putty, texture coating, concrete floor sealant, self-leveling cement and thermao insulation mortars...
Nowadays, our yearly capacity is nearly 50, 000 tons in the high quality special building materials. The capacity and the market share are both stand in the front rank of the industry.
