Product features
1. Has strong cohesion force.
2. Be premixed and produced, easy operation.
3. Has strong water retention, thin construction, , to reduce material consumption and building load.
4. Has good flexibility to resist effectively the destruction of various stresses.
5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.
6. It is no-toxic, no-radiation, no smell and environmental.
7. Has special formula to prevent the flow with too much southbound crash, easier construction.
Treatment of base plane
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.
3. New plastering cement mortar could be constructed after 14 days maintenances.
Construction technology
1. Construction tools: Leveling instrument, dentiform drawknife (3 X 3mm, 4 X4mm, 6× 6mm, 8× 8mm, 10 X10mm), tile generator, motor stirrer, big drum, cross-colloidal.
2. Stir and mix: Mix tile adhesive and water as 25: (6-6.5) stirs completely and waiting for 5 minutes, stir again.
3. Layup construction: Scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² Each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
Attentions
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5-40° C.
3. Don't use the dried paste by reading water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
Technical parameters
|
Original tensile adhesive strength(Mpa) |
≥1.0 |
|
Tensile adhesive strength after water(Mpa) |
≥1.0 |
|
Tensile adhesive strength after thermal aging(Mpa) |
≥1.0 |
|
Tensile adhesive strength after thawing cycle(Mpa) |
≥1.0 |
|
Tensile adhesive strength after standing for 20 min(Mpa) |
≥1.0 |
The brand of "Yunyan" was established in 1993. Our headquarter is located in Guangzhou, Guangdong. As the leader in special building materials industry, "Yunyan" series of special building materials are sold well for many years in China and around the world. By virtue of stable quality, we obtain lots of customers' extensive approval.
Since 2000, by means of the technical accumulation in the field of special building materials' R&D for 20 years, as well as to comply with our country's industrial policy of environment protection and energy saving, our company has invested over half of our technical forces on the R&D and marketing for polymer dry powder series, such as tile adhesive, grout, wall putty, texture coating, concrete floor sealant, self-leveling cement and thermao insulation mortars...
Nowadays, our yearly capacity is nearly 50, 000 tons in the high quality special building materials. The capacity and the market share are both stand in the front rank of the industry.
