Categories
| Price: | Negotiable/Piece |
|---|---|
| Trade Terms: | FOB,CFR,CIF |
| Min Order: | 1/Piece |
| Pay Type: | L/C,T/T |
|
Structural weight (kg) |
16740 (Straight spade, without anti-vibration shelf and agitator) | |||||||||
| 17662 (Straight spade, with anti-vibration shelf, without agitator) | ||||||||||
| 18905 (Angel spade, with anti-vibration shelf and agitator) | ||||||||||
| Performance dimension | 1) Minimum radius of gyration (m) | 3.1 | ||||||||
| 2) Gradeability | 300 | |||||||||
| 3) Stability (front-back-left-right) | 350 | |||||||||
| 4)Speed(km/h): | forward reverse | |||||||||
| Speed I | 0~3.8 0~4.9 | |||||||||
| Speed II | 0~6.6 0~8.5 | |||||||||
| Speed III | 0~10.6 0~13.6 | |||||||||
| 5) Total length × width × depth | 5025×3416×2783 (to the top of exhaust pipe without tooth depth 65) | |||||||||
| 5025×3416×3025 (to the top of driving cab without tooth depth 65) | ||||||||||
| 6256×3416×3210 (to the top of anti-vibration shelf with tooth depth 65) | ||||||||||
| 6) Crawler centre distance (mm) | 1880 | |||||||||
| 7) Width of track shoe (mm) | 510 | |||||||||
| 8) Grounding length (mm) | 2430 | |||||||||
| 9) Grounding pressure (kPa) | 65.8 | |||||||||
| 10) Minimum ground clearance (mm) | 400 | |||||||||
| 11) Max. drawbar pull (kN) | 150 | |||||||||
| 12) Max. working efficiency (40m load distance) (m3/h) | 145 | |||||||||
| Power transmission | 1) Engine | Number of cylinders- bore × stroke | 6-126×130 | |||||||
| Power [kw (ps) r/min] | 120 (163) /1850 | |||||||||
| Max. torque [N.m/r/min] | 768/1100~1200 | |||||||||
| Rated condition specific fuel consuming rate [g/kw.h] | ≤225 | |||||||||
| Minimum fuel consuming rate [g/kw.h] | 215 | |||||||||
| 2) Hydrodynamic torque converter | single-stage, single-phase, three-element | |||||||||
| 3) Power shift gear box |
Epicyclic gearing,manual hydraulic gear shift, forced lubrication Three forward gears and three reverse gears |
|||||||||
| 4) Central transmission | spiral taper gear, splash lubrication | |||||||||
| 5) Final transmission: | double reduction with spur gear | |||||||||
| walking part | 1) Riding wheel (one side×2) | 2×2 | ||||||||
| 2) Bearing wheel (one side×2) | 6×2 | |||||||||
| 3) Crawler | composite type, single tooth, tooth depth 65mm, the width of track shoe 510mm | |||||||||
| Working hydraulic system | Oil pump: | gear type, output 250L/min (1850r/min) | ||||||||
| Control valve | duplex | |||||||||
| Cylinder | double acting piston type | |||||||||
| Hydraulic tank | control valve built in type | |||||||||
|
Working device 12 |
1) Supporting methods | inclined support with inclined cylinder in the left side | ||||||||
| 2) Main parameters | Direct inclined spade.71 (wet land.71) U spade.73 spade for environmental sanitation .75 (we land. 75) angle spade. 70 | |||||||||
| The width of mould board (mm) | 3416 (4150) 3477 3416 (4150) 3970 | |||||||||
| The depth of mould board (mm) | 150 (1005.5) 1140 1650 (1555.5) 1032 | |||||||||
| The weight of working device (kg) | 2400 (2290) 2825 2516 (2404) 2163 | |||||||||
| Shovel blade capacity (m3) | 4.5 (4.2) 5.0 9.0 (9.7) 4.2 | |||||||||
| Cutting blade angel of the mould board | 550 | |||||||||
| Max. lifting ground (mm) | 1095 (1125) 1095 1095 (1125) 1110 | |||||||||
| Max. digging depth (mm) | 545 (450) 545 545 (450) 530 | |||||||||
| Max. amount of inclination(mm) | 860 860 860 400 ( each 250 for forwards and backwards) | |||||||||
| Ripper | Max. digging depth (mm) | 572 | ||||||||
| Max. lifting height (mm) | 700 | |||||||||
| weight (kg) | 1633 (78A=1480) | |||||||||
| Overall dimensions of rigger: length × breadth × height (mm): | 1692×2085×1280 | |||||||||
| Prod Model: | ZD160-3 |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Walking Mode: | Crawler |
| Condition: | New |
| Load And Unload Method: | Front Discharge |
| Type: | Bulldozer |
