D1TE Tile adhesive is formulated with an advanced acrylic polymer technology. This adhesive is paste, can use directly.
YY-112D YY-115D
Product features
1. Easy operation
2. Has high bond strength.
3. Has strong water retention.
4. Being premixed that can use directly.
5. Has good flexibility to withstand shock and vibration.
6. Has special formula to reduce material consumption and building load.
7. It is non-toxic, non-flammable, non-radiation, non smell and environmental.
Scope of application
D1TE It is suitable to fix various small tiles and mosaic onto conventional substrates, precast concrete panels, concrete, cement renders/screeds. Both on wall and floor in interior or exterior.
Treatment of base plane
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m ruler, error should be less than 5mm.
3. New plastering cement mortar should be constructed after 14 days maintenances.
Construction technology
Construction tools: Leveling instrument, dentiform drawknife (3 X 3mm, 4 X4mm, 6× 6mm, 8× 8mm, 10 X10mm), tile generator, motor stirrer, big drum, cross-colloidal.
Lay-up construction: Scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² Each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
Attentions
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5-4centigrade.
3. Don't use the dried paste by re-adding water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
Storage period
Keep in a cool and dry place, unopened powder valid for one year.
Spec: 18L or 20kg/barrel
Technical Parameters(YY-115D)
Original tensile adhesive strength(Mpa) |
≥1.0 |
|
Tensile adhesive strength after water(Mpa) |
≥1.0 |
|
Tensile adhesive strength after thermal aging(Mpa) |
≥1.0 |
|
Tensile adhesive strength after standing for 20 min(Mpa) |
≥1.0 |
|
Technical Parameters(YY-112D) |
|
|
Original tensile adhesive strength(Mpa) |
≥0.5 |
|
Tensile adhesive strength after water(Mpa) |
≥0.5 |
|
Tensile adhesive strength after thermal aging(Mpa) |
≥0.5 |
|
Tensile adhesive strength after standing for 20 min(Mpa) |
≥0.5 |
|
Use level list |
|
Tile size |
Drawknife size |
Use level(kg/sqm) |
|
10x10cm tile or mosaic or below |
6x6mm tooth form for base |
3-4 |
|
60x60cm tile and stone or below |
8x8mm tooth form for base |
4.5-6 |
|
60x60cm tile and stone or above |
10x10mm tooth form for base |
6-8 |
|
60x60cm tile and stone or below, with deep groove |
8x8mm tooth form for base
3x3mm tooth form for tile back |
6-8 |
|
60x60cm tile and stone or above, with deep groove |
10x10mm tooth form for base
3x3mm tooth form for tile back |
8-12 |
The brand of "Yunyan" was established in 1993. Our headquarter is located in Guangzhou, Guangdong. As the leader in special building materials industry, "Yunyan" series of special building materials are sold well for many years in China and around the world. By virtue of stable quality, we obtain lots of customers' extensive approval.
Since 2000, by means of the technical accumulation in the field of special building materials' R&D for 20 years, as well as to comply with our country's industrial policy of environment protection and energy saving, our company has invested over half of our technical forces on the R&D and marketing for polymer dry powder series, such as tile adhesive, grout, wall putty, texture coating, concrete floor sealant, self-leveling cement and thermao insulation mortars...
Nowadays, our yearly capacity is nearly 50, 000 tons in the high quality special building materials. The capacity and the market share are both stand in the front rank of the industry.
