Biogas Flare / Gas Flare / Gas Torch

Biogas flare / Gas Flare / Gas Torch



The structure design description for biogas flare
(1) The flare body is adopted with high temperature resistant castable. The outer is made by 304*3 stainless steel.
Chamber fitted with high density ceramic fiber lining of adequate thickness, which can ensure the surface temperature
Not over 60° C.
(2) The hood is made by 304 stainless steel.
(3) The burner is made by hea-tresistant steel (SS321) and It is fitted in the bottom of flare. Flaming air will be
Enter into the combustion room through the louver in the bottom of flare.
(4) The height of biogas flare is 5.35meter. The emission temperature will be 600~700C and it complys with
Europe standard.
(5) The biogas flare is a integrate structure. It can be installed in the ground base and then fixed.
(6) The flare system include: Flare body, Ignition system, flame detecting system, gas supply electronic valve,
Automatic controlling system and manual controlling system, stand mounted with a rain hood.
(7) Manual blow off valve is fitted.
(8) The flare dimension: Diameter is 1.5m and height is 5.35m. Burner is adopted with SS321.
(9) "Natural draught" combustion chamber raised off the ground and mounted.
(10) The flare is designed as secondary ignition. An air inspirator type pilot ignited by a flame front mechanism.
(11) Low pressure and high pressure data will be set. Flare will be off in low pressure and on in high pressure with
Big flame.
(12) The electronic valve and flame arrestor is anti-explosion. All the inside pipe is stainless steel material.