Overview
WL-R200 series Router is the internet of thing wireless communication router and a machine-to machine (M2M) industrial cellular router, which works on LTE/WCDMA/HSPA+, EVDO/TD-LTE etc cellular network to provide reliable, robust and high speed wireless connection. High performance industrial 32 bit CPU and harden casing design enable the router for various of industrial application and working under extreme environment.
Highlights
- Industrial design and LTE/3G Module, 2.5G compatible
- Strong electromagnetic interference Resistance
- Heat endurance and radiation ability
- Built-in watch dog, Multi-link detection
- WAN /Wi-Fi network backup
- Always online, reboot automatically if disconnected to ensure continual connection
- Ultra security, VPN, PPTN, L2TP, GPE, IPSec VPN optional
- Sheet Metal Housing
Features
- Optional LTE /WCDMA/HSDPA/HSPA+/EV-DO module, backward compatible with GPRS, EDGE, CDMA 1X network
- Support TCP/IP, PPP, Telnet, SSH, HTTP (s) network protocol
- VPN optional, GRE over IPSec, IPsec over PPTP/L2TP.
- 802.11b/g/n Wi-Fi support, 150Mbps data rate
- WAN port support PPPoE, static IP, DHCP client.
- WAN and Cellular back up each other
- GPS, DTU function alternative
- Support APN and VPDN wireless private network access in
- LCP/ICMP/flow/heartbeat check, ensure network usability
- Web/CLI/SSH/Management platform support, easy configure
- SNMP network management, NTP support
- Local & remote management (configuration, status, upgrade firmware)
- Supports DHCP Server
- Supports DNS proxy and Dynamic DNS (DDNS)
- Supports timing operation
- Supports LED status indication
- Customized acceptable
Typical Application
- Remote Data Monitor
- CCTV surveillance
- AMR,
- Remote POS/ATM
- Vending Machine
- Telemetry
- Vehicle Surveillance and Control
- Bus 4G/ 3G WiFi etc.
Specification
Optional Supports Mobile Network
A) LTE
B) WCDMA/UMTS/HSPA/HSPA+
C) EDGE/GPRS
D) CDMA2000 EVDO/CDMA 1X
Ethernet Standard
A) IEEE 802.3
B) IEEE 802.3u
Interface
A) 1× 10/100MB LAN interface
B) 1× 10/100MB WAN interface
C) 1× RS-232 console port(RJ45)
D) 2× SMA-K antenna interface
E) 1× Standard SIM/R-UIM interface
F) 1× Standard DC power interface
LED instruction
A) SYSTEM
B) Power
C) WLAN
D) WAN
E) LAN (LAN1~LAN2)
Route protocol
A) Static route
B) RIPv2/OSPF dynamic route
Power supply
5~26VDC
Device management
A) Local or remote web browser (IE V8 or above)
B) CLI/Telnet command
C) M2M management platform (optional)
D) SSH configure (optional)
Wi-Fi
A) Standard: IEEE 802.11b/g/n
B) WEP, WPA and WPA2 encryption
C) WPS key
D) AP, Client, station, bridge mode support
Firewall & Filter
A) IP packet/Domain/MAC filter
B) NAT
C) DMZ
VPN
A) IPSec
B) PPTP/L2TP client
C) GRE/IPIP
D) OpenVPN optional
Power consumption
A) Idle: 80mA@+12VDC
B) Single Module Communications: 320mA@+12VDC
C) Dual Module Communications: 600mA@+12VDC
Others
A) Dimension: 103mm X 73.5mm X 25.5mm
2. (not including antenna)
A) Weight: 300g
B) Operation temperature: -30~+75
C) Store temperature: -40~+85
D) Related humidity: < 95% (non-condensing)
E) Guarantee: One year
