Eps 3d panel production line, foam EPS Sandwich panel construction machinery, sanwich panel line, sandwich panel making machine, insulated panel machine
Components of whole set sanwich panel machinery:
Roll forming mahine and Sandwich panel press machine
Detailed specification of whole set sandwich panel machine:
Introduction:
Sandwich panel line is a compound line, contain roll forming machine and sandwich panel rolling system. The whole line is controlled by the PLC control center.
The material is steel sheet coil, its thickness can be 0.4-0.6mm, width can be 1250mm, the hydraulic strength ≤ 235MP. The stuffing is EPS or Rock Wool.
Technical Parameters:
Sandwich panel size:
Length: ≥ 2m
Width: ≤ 1250mm
Thickness: As per the drawing
2. Steel sheet coil size:
Thickness: 0.4mm-0.6mm
Width≤ 1250mm
The max weight: 5T
Inner diameter of coil: 500mm and 600mm
Outer diameter of coil: 1000mm
3. Stuffing material: EPS
Density≥ 18/m3, tolerance of straight≤ 1/m, arched tolerance≤ 3/m, Level tolerance≤ 1.5mm, EPS panel length≥ 3m.
4. Stuffing material: Rock wool
Density≥ 100/m3, Rock wool panel length≥ 3m.
5. Processing speed: 1000-3000mm/min (The speed can be adjusted)
6. The length of the whole line: 40m
7. The available Length of sandwich panel: 7.5m
8. Control center: PLC
9. Power of main motor: 40kw
10. Power source: 380V/3phase/50 Hz
11. Air pressure: 0.7MP (you can control by yourself)
12. The best working temperature: 25oC.
13. Material of roller: C45steel hard chrome plating
14. Material of blade: Cr12
We also can design and manufacture as per your request!
|
Advantage of our sandwich panel construction machinery |
|
High quality |
|
Lower cost |
|
Durableness |
|
High efficiency |
|
Reliable working |
|
Low failure rate |
|
Low energy consumption |
|
Trouble free after sales service |
Botou Huikeyuan Engineering Control Co., Ltd is the "Important individually-run enterprise"of Botou City. Since many years, we devoted ourselves to develop the metal-plate cold forming machine, now we have unique management pattern and products development ability. Our company leads first in the same field. Our products have light structure and reasonable design, they won praise from same steel structure field because of the innovation constantly.
The company is located at side of No. 104 national road in Botou City, which is the famous casting city in China. The company covers an area of over30, 000 square meters. We have near 100 technicians in different skills. We remain the first-rate level on design and production of C-type and Z-type steel equipment, at the same time, we increased the tile press computer control system production line, antique glazed tile machine production line, H-type steel machine production line, big-span, no-beam structure equipment production line and automobile carriage board machine production line. We can design and manufacture the special type machine according to the customer's requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.
According to the requirements of market, ou company produced new and high technological products-KDQ type quantified cutting control system in Jan. 2000. This control system has functions of measuring, monitoring and early warning. It has high starting point, accurate measurement, easy operating and complete monitoring. It is the originated one in domestic, a breakthrough of cutting control on microcomputer technique and the miracle of rutting fields.
At recent years, large of products were sold to Russia, India, England, Australia, America, Kazakhstan, Tajikistan, Malaysia, Nigeria, Rumania and Albania etc, more than 50 countries and regions. ur products won acclaim from all customers in domestic and abroad.
