Product specification of LED strip:
1. LED Type: SMD3528/5050
2. LED Qty: 30LEDs/m, 60LEDs/m, 90LEDs/m, 120LEDs/m
3. Waterproof Glass: IP20, IP65, IP67, IP68
4. PCB: 8mm/10mm in yellow/white color
5. Input voltage: DC12V
6. Package: 5meters/rell in an antistatic bag
7. 3LEDs-cuttable at marked intervals
8. Connect quickly with connectors
9. Match the suitable power supply and remote controller
10. 3m self-adhesive or matched mounting clip for easy stallation.
11. Certificate: CE, FCC&RoHS approval
12. Warranty: 2 years for LED strip
Features of LED strip:
1. Can be curved freely and fixed on the uneven surface
2. It can be cut in every 3 LEDs in on unit
3. With 3m adhesive tape on the back which can be fixed easily
4. The strip light is small in size, light in weight, easily installation
5. Colors: Red, green, blue, yellow, white, warm white, RGB available
6. Energy saving and environmental friendly
7. High brightness, long lifespan LED strip
Application of LED strip:
1. Architectural decoration lighting
2. Backing lighting for signage letters
3. Decoration lighting for under water project
4. Archway /canopy & bridge edge lighting
5. Auditorium walkway LED strip lighting
6. Amusement park / theater /aircraft cabin mood lighting
7. Stairway accent LED strip
Assembly information of LED strip
- Solder connection should only be performed on designated solder pads(market"+/-"). During soldering, don't exceed the maximum soldering time of 10 seconds, and the maximum soldering temperature of 260 Celsius degrees.
- The smallest unit(100mm-3LEDs) can be removed by cutting with scissors between the designated solder pads.
- The mounting of the strip is facilitated by means of the double sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partide. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned. Press on the strip with about 20N/cm2(refer to application techniques of 3M adhesive transfer tapes).
- The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.
|
LED type |
LED Qty |
Color |
Voltage |
Power |
PCB Width |
Length |
Waterproof Glass |
|
3528SMD |
30LEDs/m |
Full colors |
DC12V |
2.4W/m |
8mm |
5meter/roll |
IP20 |
IP65 |
IP67 |
IP68 |
|
3528SMD |
60LEDs/m |
Full colors |
DC12V |
4.8W/m |
8mm |
5meter/roll |
IP20 |
IP65 |
IP67 |
IP68 |
|
3528SMD |
90LEDs/m |
Full colors |
DC12V |
7.2W/m |
8mm |
5meter/roll |
IP20 |
IP65 |
IP67 |
IP68 |
|
5050SMD |
30LEDs/m |
Full colors |
DC12V |
7.2W/m |
10mm |
5meter/roll |
IP20 |
IP65 |
IP67 |
IP68 |
|
5050SMD |
60LEDs/m |
Full colors |
DC12V |
14.4W/m |
10mm |
5meter/roll |
IP20 |
IP65 |
IP67 |
IP68 |
Ostar Lighting Technology Co., Limited, is a China-based global manufacturer of kinds of LED lights. We are specialized in a wide range of LED lights, including LED Strips, LED Bulb, LED Spotlight, LED Downlight, LED Flood Light, LED Bay Light, LED Tube, LED Candle Light and so on. OEM & ODM are also available.
with hard working and innovations these years, we have won a good reputation among customer & partners from worldwide. We consider high quality, competitive price, fast delivery and gold credibility as our business principal. Therefore, our customers & partners from different countries can enjoy a good pre-sales and post-sales service from us. Moreover, every production procedure in Ostar Lighting Technology Co., Ltd is monitored by our quality control stuff and every item is checked by our QC Team. Our products got approvals by most of international standards. Most of our products got CE & RoHS certifications.
