Shoulder Press Gym Equipment

Product name: Shoulder press
Alternative steel: The hanged weight is made of hard steel, at the easy-reaching height and easy to adjust
Frame embellishing: Unique two-double baking varnishing makes the machine noble as a car, at the same time, embellishing can prevent the machine from scrapping and paint-falling
Cushion: Make the user in a comfortble protector, prevent user from hurting and also support the user
Introduction card: Sit down on the nature, straight your back, hold the handle, pulling backward forcefully to the maximum extent, then come back slowly to the original place, and repeat the action.
Muscle exercised: Deltoid, biceps, latissimus dorsi
Measure(L*W*H)160*150*170(CM)
Frame Rubber Cover:
1. Frame cover made from rubber, 8mm thickness.
2.2. No matter in winter or summer the cover never is out of shape and the cover can last for long time.
3. The logo inside the frame cover with drop rubber material which is 2.5mm thickness.
4. The logo can be design as customer's request
5. Inside the frame cover is muscle instructions making from 2mm PVC material never run out of color and broken.
6. All the PVC instruction and the logo use M3 glue which can be last for long time and never drop down.
Seat color and leather
1. 2.5mm PU leather, chinese top grain leather.
The leather surface can be bear heavy scrape, also very soft and not easy be broken in winter.
Weight Stacks
1. The weight is made of very solid steel plate.
2. Two weight design can be chosen.
3. All the weight is 5kg each
4. For the surface of weight very smooth, so the plug can be put inside the weight very easily.
Cable
1. Cable is high wear resistant, tensile strength.
2. Out cable use oiliness stainless steel which is imported from germany.
3. Cable internal diameter is 6.0mm with 7 picecs stainless steels inside and covered with wear resistant soft rubber.
4. Cable max can bear 18.6KN each to 1600kg
Pulley
1. Pulley has two material. One is with polypropylene(PP-R) and second is made of aluminum alloy.
2. Each pulley have inside oiliness bearing which make the pulley moving smoothly and stably.
Painting
1. Smoothly, second steps remove oil and rust
2. First step we use dresser to polish the crater which can make the tube surface very smooth and make the face of weld the same level.
3. The second step we take physical way to remove the rust which make the painting with strong adhesive force and not easy be scratched and rust agsin
4. Isially our common colors are grey silver and dark silver same as photos. But other color can be available also just like black, yellow, red and so on.
Welding
1. Carbon dioxide welding.
2. All the tube cut face we have open models to make sure the connected face connect with each other without a too big gap, than can make a very beautiful welding surface.
3. The very important way to make the machine keep the same shape is that we make lots of jip and fixture as photos when the machine be welding.
4. Only through jip and fixture can make sure all of our machine's biomechanics motion trail professional and not changeable.
Tube
1. All our steel pipe use high quality q235 material.
2. Our series main tube size is 50mm*100mm*3mm.
3. All of our guide rod all use solid stainless steel.