Poplar Core Plywood, Full Poplar Plywood for Furniture Plywood & Packing Plywood:
f/b:Okoume,bingtangor,poplar,birch
grade:BB/CC,C/D,D/E
Specification: 1220x2440mm/1250x2500mm
CERT:CARB P1/P2, CE
Conventional data: Size: 1220mm*2440mm &1250mm*2500mm or as your demand
Thickness:
(9-30mm)
3/8inch(8.5-10.2mm) 9mm = 37.33sheets/cbm
1/2inch(12-12.7mm) 12mm = 28sheets/cbm
5/8inch(15-16mm) 15mm = 22.4sheets/cbm
3/4inch(18-19mm) 18mm = 18.66sheets/cbm
Core: poplar,hardwood,combi,pine,etc
Glue: wbp ,melamine mr,
Face/back: Okoume,Bingtangor,poplar,pine,birch,etc
Grade: BB,BB/CC,CC,CC/DD,etc
Moisture: <12%
Thickness tolerance:
(+/-)0.5mm equal to and more than 12mm
(+/-)0.3mm less than 12mm
Physical parameters:
density:>550-650G/cbm
modulus of rupture: > 30Mpa
modulus of elasticity :>6000Mpa
Standards:
Goods grading standard for CE,FSC,CARB P1/P2,POVC
Packing:
inner pallet lined with 0.2mm plastic bag
Outer
pallet is covered by plywood and then steel tape for strength
Quantity:
20'GP 8 Crates/1012000kgs/21~24cbm
40'GP 16 Crates/24000kgs/48cbm
40'HQ 18 Crates/26000~28500kgs/50~59cbm
Delivery time:
In 15 days after order confirmed
Term of payment:
L/C at sight, T/T 50%+50%
Capacity:
3000 Cubic Meter / Month
Products vantages:
1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed
2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing
3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould)
4. Solves the problems of leaking and rough surface during constructing process
5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6. Realizing a higher economic profits
|
cts vantages: |
1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed |
|
2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing |
|
3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould) |
|
4. Solves the problems of leaking and rough surface during constructing process |
|
5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat |
|
6. Realizing a higher economic profits |
|
Conventional data: |
Size: |
1220mm*2440mm &1250mm*2500mm or as your demand |
Thickness:
(9-30mm) |
|
3/8inch(8.5-10.2mm) |
9mm = 37.33sheets/cbm |
|
1/2inch(12-12.7mm) |
12mm = 28sheets/cbm |
|
5/8inch(15-16mm) |
15mm = 22.4sheets/cbm |
|
3/4inch(18-19mm) |
18mm = 18.66sheets/cbm |
|
Core: |
poplar,hardwood,combi,pine,etc |
|
Glue: |
wbp ,melamine mr , |
|
Face/back: |
Okoume,Bingtangor,poplar,pine,birch,etc |
|
Grade: |
BB,BB/CC,CC,CC/DD,etc |
|
Moisture: |
<12% |
|
Thickness tolerance: |
(+/-)0.5mm |
equal to and more than 12mm |
|
(+/-)0.3mm |
less than 12mm |
|
Physical parameters: |
density:>550-650G/cbm |
|
modulus of rupture: > 30Mpa |
|
modulus of elasticity :>6000Mpa |
|
Standards: |
Goods grading standard for CE,FSC,CARB P1/P2,POVC |
|
Packing: |
inner |
pallet lined with 0.2mm plastic bag |
|
Outer |
pallet is covered by plywood and then steel tape for strength |
|
Quantity: |
20'GP |
8 Crates/1012000kgs/ 21~ 24cbm |
|
40'GP |
16 Crates/24000kgs/48cbm |
|
40'HQ |
18 Crates/26000~28500kgs/ 50~ 5 9 cbm |
|
Delivery time: |
In 15 days after order confirmed |
|
Term of payment: |
L/C at sight, T/T 50%+50% |
|
Capacity: |
3000 Cubic Meter / Month |
ZHANGHZOU PINGXING WOOD Co., Limited established its present on 2013 with registered capital of 20, 000, 000 CNY, which is belong to same enterprise legal person of XIAMEN HENCY Trading Co., Limited which is established on 2011.
PINGXING Wood Factory located in Zhao' An Zhangzhou city with two main reasons, one because of local abundant Eucalyptus & Pine forests, another its our factory can supply local surplus labors more than 200 jobs, current our factory has an area of 200, 000 Square Meters, with total investment amount of 35, 000, 000CNY, Year Value of 25, 000, 000CNY. Current has four production lines for Plywood, and two productioin line for Auto. Rotary Cutting Veneers.
Our factory main plywood is Eucalyptus plywood (hardwood plywood), Pine plywood, Birch Marine Plywood and Combi-Wood Plywood. Current Month Capacity is 4000 CBM. Plywood thickness available from 3MM - 30MM. Plywood Boars of size 1220X2440mm(4' X8' ), 1250X2500mm, 915X1830(3' X6' ) or as per your requirement. Plywood grades including:
Shutterring Plywood & Film Faced Plywood for Construction.
Fancy Plywood & MFC (Melamine faced chipboard) For Furnitrue.
Marine Plywood
Plain Plywood for package.
Secondary products is interior phyllostachys pubescens Bamboo plywood, bamboo board, bamboo panels, of length 1000mm, 1200mm, 2000mm, 2200mm, 2500mm. Width from 5mm to 1250mm. Thickness from 3mm to 100mm. The bamboo color has natural or carbonization treatment. Including grains / Structure of Full horizonal, Full vertical grain, cross vertical and horizonal structure.
Also we supply exterior strandwoven bamboo board, And bamboo horsetable.
Aslo outdoor strand woven bamboo bride panels, bamboo flooring...
Third Main products is Eucalyptus short Core Veneers. Current Month capacity is 3000 CBM. The Veneer thickness from us is 0.8MM - 2.5MM. Veneer sheet is 1270 X 640MM and 970 X 480MM. The Moisture is about 16%. The grade is AA Grades.
Our factory advance:
* We are as the owner or manager of local Eucalyptus forests, we have a Responsibility to protect the long-term viability of our forestry resources. Our forestry operations are maintained on plantations, which are available for use by local ranchers. This provides a Sustainable source of employment in the region, stimulating the creation of new business and supporting industries.
* We make use of local surplus labors, which make solution to local labors meanwhile those labors enable our factory production capacity, also ensure the delivery time for our goods.
* We established our factory at GuangPi where just close to our Eucalyptus forests, which save the carrying cost on logs from the source and we will make such preferential to our clients directly.
PINGXING WOOD Co., Limited sincerely welcome all of the clients and friends to visit our factory any time. We are looking forward to discuss with you for further cooperation.
