High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
1. HDPE High Density Polyethylene
2. Virgin/recycle HDPE
3. ISO9001 competitive price
4. Film grade, blow grade, injection gradeHDPE cable material Property
Typical Value
Mass density g/cm 3
0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)g/10min
≤ 1.0
Tensile yield strength MPa
≥ 19.0
Flexural modulus Mpa
≥ 965
Elongation@ break %
≥ 400
Impact Embrittlement temperature centidegree
MAX -118
Dielectric Constant
100kHz
2.32
1MHz
2.31
Loss Tangent
100kHz
MAX 0.0001
1MHz
MAX 0.0001
Volume resistivity OHM-CM
MIN 1X10 15
Item |
Test Condition |
Test Method |
Value |
Unit |
MFR |
190°C/2.16kg |
ASTM D-1238 |
20 |
g/10min |
Density |
--- |
ASTM D-792 |
0.954 |
g/cm3 |
Tensile strength at yiled |
--- |
ASTM D-638 |
33 |
MPa |
Elongation at break |
--- |
ASTM D-638 |
250 |
% |
Impact tensile strength |
--- |
ASTM D-1822 |
42 |
kJ/m2 |
ESCR |
|
ASTM D-1693 |
3 |
--- |
VACIT |
--- |
ASTM D-1525 |
127 |
°C
|
Understanding our customers, we care about the future of our business. Up to today, with reasonable price and good quality, all our products sell well in the international marketing. We want to ensure that you get our good service, only high quality and speedy delivery. We sincerely want to supply you with high quality products and perfect service based on our efficient management and professional work teams. Because professional, so trust!