Rubber Sheet Cooling Line:
Function:
The batch-off is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.
Technical Parameters:
Model No.: RSL-1000
Applicable slab specification: (4-12) x 1000mm
Take-away conveyor belt max. Linear velocity: 35m/min
Slab hanging bar moving speed: 0.117~1.17m/min
Axial fan specification: FTA-8 / 0.25kW
Axial fan quantity: 20nos
Swing range: 1.3m
Swing frequency: 13times/min
Slab temperature after cooling: Room temperature± 15° C
Weight: 16800kg
Features:
1. There are two structure types: Overhead and floor-standing types, whose hanging racks are vertically turning with compulsive cooling.
2. The rubber strip hanging bar adopts step by step cylinder or motor-reducer for driving.
3. Structure:
1) The batch-off unit consists of mainframe and electrical control system.
2) The mainframe is composed of splicer, printing, slitter, isolation cooling, lifting device, hanging strip cooling, auto wig wag section, weighing, handrail, platform and supporting bracket etc...
3) The electrical control system consists of main control cabinets, and there are emergency stop device in key areas.
Advantages:
1. The clients can choose high or low disposition according to the practical requirements.
2. The high dispostition batch-off line has hydraulic auto wig wag section, which can battle the rubber strip tidily, the strip tidy ratio≤ 100mm.
3. There are three working positions for auto entering and outputting of material tray; Auto rubber collecting device, auto cutter, it has high automatization and can realize nobody operating.
Our Services:
1. One year warranty and lifetime technical support.
2. Engineers available to service machinery overseas.
3. Any demand, we will give feedback within 24hours.
About batch-off unit Price:
The price bases on the following factors:
1. Structure: Overhead or floor-standing
2. Length: The suitable length for the cusomer's plant
3. Fan's quantity: The suitable quantity of fans which is needed
4. Automatic device: Suitable selection of automatic device
Our Target: Give the best scheme based on the customer's requirement.
Any question, please feel free to contact with me.
WE CAN DESIGN AND MANUFACTURE NON-STANDARD MODELS AS PER THE REQUIREMENT OF CUSTOMERS.
Other Series Technical Parameters:
Rubber Sheet Cooling Line Model No. |
XPG-600-700 |
XPG-800-900 |
Available slab specification |
(4-12)x600-700 |
(4-12)x800-900 |
Front take-away conveyor belt max. linear velocity |
40m/min |
40m/min |
Rubber strip hanging bar moving speed |
0.117-2.3m/min |
0.117-2.3m/min |
Axial fan |
0.37kW 5760m³/h |
0.37kW 5760m³/h |
Swing range and frequency |
1.3m 10-16times/min |
1.3m 10-16times/min |
Rubber strip temperature after cooling |
≤Room temperature +5ºC |
≤Room temperature +5ºC |
Speed-adjusting frequency motor of lifting device |
XWD-5.5-1/23 |
XWD-5.5-1/23 |
Speed-adjusting frequency motor of rubber swing device |
XWD1.1-5-1/87 |
XWD1.1-5-1/87 |
Rubber bar pitch |
160 or 101.6 |
160 or 101.6 |
Max. hanging height of rubber strip |
1400mm |
1400mm |