Hot Searches: black copier frame key chain usb key chain enamel key ring souvenir key ring promotional souvenir key ring coin key chain zinc alloy holder gold key chain with ring aluminum key chain key cutter

2014 for Toyota Key Copier Programmer Car Key Programmer for Toyota Key Copy

Price:	Negotiable/Piece
Trade Terms:	FOB
Min Order:	1/Piece
Pay Type:	T/T,Western Union,Paypal

Contact Supplier

Showroom Product Company Profile

For Toyota key Copier programmer's main function: For Toyota key copy, compatible with Toyota cars range from 1997 to 2005. For Toyota key Copier can: 1. Read the pin code of the transponder key automatically 2. Write the pin code into the computer transponder of the suited ECU. 3. Match the vehicle without keys and needn't change any computer when matching.

For Toyota Key Copier
Function:
1. Read the pin code of the transponder key automatically
2. Write the pin code into the computer transponder of the suited ECU.
3. Match the vehicle without keys and needn't change any computer when matching.

Compatible vehicles:
Be suitable for all the Toyota Series from 1997 to 2005.
Be suitable for the wafer key's match of Toyota, such as LEXUS (LS400 ES300 GS300 IS2000 IS300), Camry 2.0, 2.4, JEEP 2007 3400 4500 4700, AVALON, PREVIA.
Detail list as follows:
1. Es300 (1997-2003)
2. GS300 (1997-2003)
3. GS400 (1997-2000)
4. Gx430 (2001-2003)
5. Is300-IS200 (2001-2003)
6. Ls400 (1997-2000)
7. Lx470 (1998-2002)
8. Rx300 (1999-2003)
9. Sc300 (1998-2001)
10. Sc400 (1998-2001)
11.4runner (1999-2003)
12. Avalon (1998-2003)
13. Cammry-4cly (1998-2005)
14. Highlander (2001-2003)
15. Lander Cruiser (1998-2003)
16. Mr2 (2000-2003)
17. RAV4 (2000-2003)
18. Sequoia (2000-2003)
19. Sienna (1998-2003)
20. Solara (1999-2003)
21. Previa (1999-2003)

How to do key program?
1.Dismantle the engine ECU from the vehicle (or IMMO) , and take down the IC chip identified as "93C56" (fixed to the computer in the vehicle engine; for the Camry being IC601, and Lexus being IC900. Identification number for a chip fixed to IMMO is 93LC66) . Clean up every pin of IC to make sure of a sound connection.
2.Install 93C56 on the device through programmer; make sure that the connection is good.
3.Supply electricity to the programmer, the screen will show"can work normal"with a beep sound indicating that the machine is working well.
4.Press"R-key", and the red light"LED" will be lit; programmer is thus ready for programming.
5.Put the key on the key logo of the programmer.
6.Press R-key again to hear the beep sound beep 4 times, and the red light also goes off, these means that the key has been successfully programming to the programmer. If the beep sound is not made 4 times, then repeat the operation until you hear the exact 4 beep sound.
7.By the stated operations you can programming 3 keys to the programmer altogether.
8.Now you can verify whether the 3 keys have been actually programmed: press R-key, put a key near the key logo, if a 4-beep sound is made, that means the programming is effective. Every key must be verified so that they can be program to 93LC56 and 93LC66.
9.Press Pr-A, Pr-B and Pr-C orderly to programming the 3 programmed keys to 93C56 (or 93LC66) . When "OK" displays, the programming succeeds; otherwise"ERROR" signal appears. Failure may be due to misconnection between 93C56 and the programmer, or the reverse installation or corruption of the chip. In this case you better repeat the adaptation twice to ensure the success.
Now that IC-93C56 (or 93LC66) has three keys programed to it, you can now weld it to the engine ECU. Make sure the weld is good.
Fit the ECU back to the vehicle. With any of the previously programmed keys you can start the vehicle now.

Notice: This machine only provide for locksmiths. Please offer related business license, original ID card and need to sign the declaration with us.

Contact information:

web sites:http://www.cndiag.com/
tel:+86 13286652684
If any problems,pls feel free to contact us.

Attention: pls leave your telephone number for shipping arrival when you make payment for this product on our website.

Prod Model:	akp39
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Type:	Code Reader, Auto Key Programmer
Voltage:	12V
Power:	Standard
Place Of Origin:	Guangdong China (Mainland)
Warranty:	1 Year
Applicable Models:	Multi Vehicles
Version:	Lastest
Performance:	Stable and Perfect
Weight:	1kg
Status:	in Stock
Certification:	CE
Update Method:	by Internet

We are specialized in various auto diagnostic tools, key programmer, km correction, hex USB cable, ECU Chip Turning, Transponder Chip, and mainly focused on BMW ICOM, SD Connect, GM MDI, VAS 5054A, VAG hex USB cable, PP2000, Renault Can Clip, MB Star C3, CK100 key programmer, SBB key programmer, T300, Zed Bull, Digiprog 3, Launch Scanner, Autel Scanner, Autoboss Scanner, etc.

We are also striving to achieve the success by providing the good quality and service to our customers, based on the dedicated engineers and leading edge manufacturing techniques, we will bring the best quality product to our customer. We make sure your will have a pleasant shopping here, our goal is to provide you good product with good price as well as services.