Changlin Motor Grader PY190H
Operating weight 15200kg
Cummins 6CTAA8.3-C185
ZF transmission
Single handle electro hydraulic controlled power shift T/M, 6 forward 3 reverse.
New appearance design.
The articulation frame is adopted and macthed with the steering of the front wheel, with small turning radius, maneuvering and flexible.
The electro-hydraulic contrals the power shift gearbox, with 6 ahead box and 3 back gears.
The international mataching hydraulic parts are adopted, with reliable operation.
The motions of the knife are fully hydraulically controlled.
The rear axle is the three-section driving axle which is provide with the NO-SPIN self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrgement of the manipulation handle and instruments are reasonable, with convenient application, and the comfprt of driving is improved.
The cab is grand and nice, with wide eyeshot and good sealing.
The front bolldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added.
Overall Dimension |
1 |
Length |
9140mm |
|
2 |
Width |
2600mm |
|
3 |
Height(To the top of the cab) |
3370mm |
|
4 |
Wheel base |
6150mm |
|
5 |
Tread |
2120(mm) |
|
Main Technical Specification |
1 |
Operating weight |
15200kg |
|
2 |
Blade length |
4268mm |
|
3 |
Blade height |
645mm |
|
4 |
Blade width |
18mm |
|
5 |
Max lifting height |
450mm |
|
6 |
Max grading depth |
535mm |
|
7 |
Min. turning radius |
7300mm |
|
8 |
Pivot angle frame |
+ 260 |
|
9 |
Max turning angle(front wheel) |
+490 |
|
10 |
Oscillating angle of front axle |
320 |
|
11 |
Front axle center ground clearance |
610mm |
|
12 |
Traveling speed(Km/h) 6 forward and 3 reverse |
|
(1) I gear forward |
6.5 |
|
(2) II gear forward |
11.4 |
|
(3) III gear forward |
14.6 |
|
(4) IV gear forward |
24.8 |
|
(5) V gear forward |
30 |
|
(6) VI gear forward |
49.2 |
|
(7) I gear reverse |
6.5 |
|
(8) II gear reverse |
14.6 |
|
(9) III gear reverse |
30 |
|
Diesel engine |
1 |
Model |
Cummins engine 6CTAA8.3-C185 (TIER2) |
ShangChai C6121 Engine |
|
2 |
Type |
Direct injection. Turbocharged. Water cooling |
|
3 |
Rated output |
138 kW |
143(kW) |
|
4 |
Inter-bore of cylinder/Stroke |
114/135 (mm) |
121/152 (mm) |
|
5 |
Total exhaust of cylinder |
8.3(L) |
10.48(L) |
|
6 |
Power of start motor |
3.7(KW) |
7.5(KW) |
|
7 |
Voltage of starting motor |
24(V) |
24(V) |
|
8 |
Rated speed |
2200(r/min) |
2200(r/min.) |
|
9 |
Max. Torque |
857(N.M) |
>748(N.m) |
|
10 |
Starting type |
Electric |
Electric |
|
11 |
Min. specific fuel consumption |
211(g/Kw.h) |
<230(g/Kw.h) |
|
12 |
Net weight |
617(kg) |
960(kg) |
|
Transmission System |
1.Torque Converter |
1 |
Model |
WG180 (ZF technology) |
|
2 |
Type |
3-elements.single stage |
|
3 |
Torque ratio |
2.52 |
|
4 |
Cooling type |
Pressure oil circulating |
|
2.Transmission case |
1 |
Model |
WG180 (ZF technology) |
|
2 |
Type |
power shift, single-shift lever, natural-shift lock device |
|
3 |
Gear shift position |
6 Forward and 3 reverse gears |
|
3.Axle and Tire |
|
1 |
Type of main reducer |
spiral bevel gear, single stage |
|
2 |
Gear ratio of main reducer |
3.583 |
|
3 |
Type of final reducer |
Single stage chain-drive |
|
4 |
Gear of ratio of final reducer |
3.75 |
|
5 |
Gear ratio |
13.436 |
|
6 |
Tandem drive |
Double row roller-chains |
|
7 |
Size of tire |
17.5-25-12PR |
|
Working Device Hydraulic System |
|
1 |
Model of oil pump(include steering pump) |
CBGj2045/1025 |
|
2 |
System pressure |
175(kgf/cm2) |
|
3 |
Model of distribution valve |
HUSCO5000-D |
|
4 |
Hydraulic check valve |
KAYABA technology |
|
5 |
Model of oil motor |
EATON, JS-130 |
|
Steering System |
1 |
Type |
Fore Tire deflexion |
|
2 |
Model of steering gear |
BZZ1-E160B/ FKA-153022 |
|
3 |
System pressure |
15MPa |
|
Brake System |
1 |
Type of traveling brake |
Hydraulic assisted and inner-expanding brake |
|
2 |
System pressure |
120(kgf/cm2) |
|
3 |
Type of parking brake |
Mechanical and inner-expanding brake |
|
Cylinder size |
|
1 |
front wheel steering cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
2-50*35*320(mm) |
|
2 |
Front wheel leaning cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-80*40*160(mm) |
|
3 |
Blade lifting cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
2-80*50*1045(mm) |
|
4 |
Power tilting cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-80*40*300(mm) |
|
5 |
Hinge turning cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
2-90*50*370(mm) |
|
6 |
Drawbar shift cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-80*45*450(mm) |
|
7 |
Blade side shift cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
2-80*50*1250(mm) |
|
8 |
Scarifier cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-90*50*300(mm) |
|
9 |
Front blade cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-90*45*400(mm) |
|
10 |
Ripper cylinder |
Type |
Double acting piston |
|
No-bore X rod X stroke |
1-100*50*635(mm) |
|
Oil Capacity |
1 |
Fuel(diesel) |
350L |
|
2 |
Engine lubricating oil |
27L |
|
3 |
Oil for converter and gear box |
45L |
|
4 |
Oil for hydraulic system |
70L |
|
5 |
Oil for driving rear axles |
18L |
|
6 |
Tandem box |
84L |
|
Evangel Industrial (Shanghai) Co., Ltd. is a leading Chinese construction machinery exporter, affiliated with Evangel International Machinery Limited, located in the downtown of Shanghai City. Since our company was founded, based on the advantage of XCMG which is the No. 1 Chinese construction machinery manufacturer, we continually introduce Chinese excellent construction machinery enterprises and their products to international markets, such as Changlin, Zoomlion, LiuGong, HOWO, Shantui, HBXG, YTO, SDLG etc. We not only make more international customers know and approbate our products, but also gradually build up friendship with construction machinery customers all over the world.
Our Strengths are as follows:
(I) Seven years professional experience in international trading and rich knowledge in construction machinery & heavy equipment industry, which enable us to turn customer inquiries into final products and export them to numerous countries and regions without barriers;
(II) A well educated and friendly sales team with international vision, members of which can speak fluent multiple languages, such as English, Spanish, Portuguese, Russian, Arabic and French etc;
(III) Strong long term dealership from various top manufacturers, assuring that all our products are original brand new ones with competitive price;
(IV) Excellent logistics services (by sea, air, railway or road), ensuring timely delivery of consignments all over the world;
(V) Comprehensive after-sales service, including one year warranty, spare parts supply, installment and maintenance, and training;
(VI) An expertly managed ERP system and a well coordinated quality control system to satisfy various client requirements.
We won the good reputation from reliable quality, competitive price and excellent after-sales service. Our export revenue increases constantly every year, and our products have already entered nearly 100 countries across the continents of South America, Africa, Middle East, Australia, Russia, Middle Asia, South Asia, Southeast Asia, and East Europe. We sincerely hope to cooperate, develop together and build a good future with you. Please feel free to contact us for more information about our products and services.