1. Power: 30kw
2. Capacity: 10-151t/h
Working condition: Reliable
Working Theory of Rotary Dryer:
The wet materials are transported into the material hopper by the belt conveyor and bucket elevator, and gets into the feeding terminal through feeding pipe with the aid of feeder of material hopper. The pitch of the feeding pipe should be more than the natural pitch of materials in order to help the materials flow into the dryer successfully. The cylinder of dryer is a rotary cylinder which is oblique slightly. The materials are fed from the relatively higher terminal, heat carrier comes in from the lower terminal, and sometimes the heat carrier and materials get into the cylinder together.
Along with the revolving of cylinder, the materials move to the lower terminal due to the gravity. When the wet materials move forward, it receives the heat from the heat carrier directly or indirectly. As a result, the wet materials are dried, and discharged out by belt conveyor or screw conveyor on the outlet. There is shoveling plate inside the cylinder in order to shovel materials up and cast it out, to increase the connection surface, to promote drying efficiency, and accelerate the forward movement of materials. Generally, the heat carrier can be hot air and chimney flue.
After the heat carrier is dried, the materials mingled with air should be collected with cyclone dust collector. If there is need to reduce the content of dust mixed with tail gas, the heat carrier should be subject to bag dust collector or wet dust collector before it is discharged.
|
Specification and Technical Parameter of Rotary Dryer |
|
Type and Specification (mm |
Rotary Speed (r/min) |
Pitch (%) |
Temperature of Inlet Air () |
Production Capacityt/h |
Weightt |
Power (KW) |
|
GZΦ 800*8000 |
3.8 |
5 |
≤ 700 |
0.8-2.0 |
3.5 |
4-6 |
|
GZΦ 1000*10000 |
3.8 |
5 |
≤ 700 |
1.0-3.5 |
5.6 |
5.5-7.5 |
|
GZΦ 1200*10000 |
3 |
3 |
≤ 700 |
1.8-5 |
14.04 |
11-13 |
|
GZΦ 1500*12000 |
2.08 |
5 |
≤ 800 |
3.3-7.5 |
17.76 |
13-15 |
|
GZΦ 1800*14000 |
2.08 |
5 |
≤ 800 |
5-9 |
29 |
18.5 |
|
GZΦ 2200*12000 |
4.7 |
5 |
≤ 700 |
6-12 |
33 |
22 |
|
GZΦ 2400*18000 |
4 |
5 |
≤ 800 |
10-15 |
53.3 |
30 |
Zhengzhou Jiangtai Heavy Industrial Machinery Co., Ltd is a heavy Machinery manufacturer with more than 25 years experience, that subordinated to China CMIIC Engineering & Construction Corporation (CMIIC)
Our leading products include whole set Mineral processing equipment and sandstone making equipment.
Mineral processing equipment includes jaw crusher, impact crusher, ball mill, classifier, flotation machine, magnetic separator, and glass fiber reinforced plastic shaker. Mine-selecting equipment is applicable to select non-ferrous metal ore such as iron, copper, gold, silver, lead, tungsten, molybdenum, manganese and non-metal ores such as fluorite and quartz.
Sandstone equipment includes PCZ single-stage hammer crusher, DPC single-stage fine crusher, PXJ Small aggregate crusher (Third generation sand-maker), jaw crusher, impact crusher, hammer crusher, composite crusher, manganese steel double roll crusher, rod milling sand maker, vibration sifter, conveyor, and sand washer. Sandstone equipment is applicable to construct airport, railway, freeway, average highway, national large bridge, sub-bottom tunnel, land tunnel and new-type high building.
