The main power of this lantern is supplied by solar, It is adopted with full seled Lead-Acid battery and U tyoe energy saving tube, also equped with a AC transformer(9V)
Considering the special air temperature.
Cations items
1 the lamp is mains supplied by 3W solar panel board, also used a 9V tranformaer(input voltage 220v~250v)as it's assistant power.
2Safekeeping
1)the lamp should be escaped from humidity circumstance;
2)the lamp should not be put in high temper ature circumstance for long time
3battery maintains
1)pls shut off the lamp then to recharge it, when ihte light goes dim
2)pls charge the lartern periodically when the larten is not being used for over 3 months
4 protection an cleanners
The solar board should be clear all time.
HOW TO USE
1 lighting and charge
1)pls use it's special electric cord to connect the lamp with the solar board;
2)pls is the power switch.
3)pls put the solar board in the sun in 90angle, AM1.5100W/m2. And the temperature should be above 25C
4)you can use the transformer to recharge the lammp, when it overcast and rainy
5)if you usually adjust the tube angle, it is good to the tube life.
ACCESSORIES
1 handle
2 chimeney
3energy saving lamp
4indicator
5on-off
6adorn ment stripe
7solar charge apeture
8battery fixture
9car charge
10solar panel
11USB DC5V
TECHNICAL SPECIFICATION
1 onput DC current: 9V/350mA
2 out put power: LED3W
3humidity; Less90%
4charging time 12Hrs
Durations time 8~10 hours
5rechargable battery: 6V 4Ah L ead-Acid battery
6 it's duration time is different under different circumstance factor, under this condition. You may use transformer to recharge it the to get it s effective duration time.
NINGBO MAXSOLAR Co., Ltd. is a professional manufacturer of solar modules and one of the best solar energy solutions providers. We have professional technology and science applied in production, research and design - and a highly-motivated team with more than 5 years experience working together.
Our factory covers 40, 000 square meters and our annual output of solar panels reaches 200MW. Our products do meet high quality standards due to the fact that all products are produced in strict accordance with the ISO9001: 2000 quality system, CE certificate and IEC 61215, IEC 61730, UL 1703 and TUV certification standards.
Our company is dedicated to provide solar modules and solar energy solutions for a wide range. So we are ready to design and produce special panels according to our customer's demand (OEM service available).
All our products are exported to Europe and the United States, Africa, Asia and other countries and quite welcomed by a lot of very satisfied customers.
