High Capacity Wheat Bucket Elevator

High Capacity Wheat Bucket Elevator

One, type and name
A, type and name
1, type: DSS28 x 15, DSS38 x 18, DSS50 x 26
2, Name: Bucket type lifting machine
Two, the use and the main technical parameters
1, use
DSS series bucket elevator is the vertical conveying granular or powdery material lifting equipment. DSS28 x 15 DSS38 x 18 DSS50 x 26 is my factory for large lifting large grain processing complete sets of equipment and grain storage, grain and oil industry in the machine market development. Its main features are: Compact structure, continuous, stable and reliable lifting materials. Can meet different lifting height and production capacity requirements.
Three, the structure and working principle
1 the structure of bucket elevator is composed of a frame, cylinder, head, bucket, belt and the driving part. Guard ring and the working platform can be configured according to the need to choose to use.
The 2 principle of material from the hopper into the elevator, the bucket access material, with the bucket belt to move around the head, round out the material, discharged from the discharge port.
Four, the use and adjustment
1 basic requirement for installation
The installation of A. Hoist must be based on a solid foundation, smooth concrete. Foundation should be consistent with the use of expansion bolts or embedded condition; Thickness should be proportional to the height with the lifting machine;
B. Center line head wheel, the barrel bottom round, should be in the same vertical line;
C. Lifting head wheel shaft and the bottom wheel machine should be installed horizontally; The two should be in the same vertical plane;
D. Bucket arranged on the elevator, there shall be no collision, jamming phenomenon;
E. Lifting machine cover from the top of the building not less than 1 meters distance, in order to open repair;
F. Components connecting bolts should be tightened.
2 installation requirements
A. Can be installed according to height, weight and site conditions take whole or split hoisting;
B. Lifting machine and the nearest stable attachments connected, no fixtures used wire rope or cable shaft bracket, avoids tilt or shift;
C. Hoist bucket and bucket belt assembly according to the requirements of the drawings in the field;
The bucket belt D. Loaded bucket by lifting machine head in, through the head wheel and the bottom wheel, bolted from the operating hole;
E. In assembly bucket belt, bottom wheel should be adjusted to the highest position;
F. Hoist after installation, should add the lubricating oil necessary to each lubricating system.
3 test run
A. Confirmed the good technical conditions, can run. First check the motor rotation direction and a self-locking mechanism to no problem and try again. When turning to observe the machine operation, each part of the rotation should be flexible, no resistance cards, no noise;
B. No-load test satisfied, on this basis, can be a short time load operation;
C. To hoist feeding should be uniform, so as not to stand up within the;
D. Jam, must stop open door cleaning, cleared the bucket after operation, can be re feed;
E. Down before must make the material discharging empty to stop.
4 adjustments
A. Properly, adjusts the seat to manually screw so that the bottom wheel moves downwards, the tightness of the belt tightening bucket. The belt will lengthen in long time running, belt stretching to adjust;
B. Mobile motor to adjust the drive chain tension;
C. Distance adjustable tilt adjustment board from the bucket edge, to prevent the return of grain;
D. Regulates feeding bucket plug door can change the feeding quantity; Ensure the bucket full rate, thereby increasing productivity.