Detailed Product Description
1. Low-profile Power Inductors with Inductance Ranging from 1 to 1, 200uH
2. Similar to coil craft and Toko, Sumida, TDK
3. RoHS.
Low-profile Power Inductors with Inductance Ranging from 1 to 1, 200uH
Specifications:
. Low profile power inductor
. Low DCR leaded power inductor
. Large-current SMD power inductor
. SMD magnetically shield power inductor
. Shielded SMD power chip inductor
. Magnetic shielded surface mount inductor with high current rating
. Low profile and shielded very effective in space-conscious applications
. Low resistance to deep power loss minimum
. Operating temperature: -20 to 85 degrees (contain heating coil)
. Appearance inspection: No external defect by visual inspection
. Terminal strength: After soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions. Terminal should not peeled off
. Heat endurance of reflow soldering: 240
. Insulating resistance: Over 100M Ohms at 100V DC between wire and core
. Dielectric strength: No dielectric breakdown at 100V DC for one minute between wire and core
. Temperature characteristic: Inductance coefficient (0 to 2, 000) x 10-6/(-25 to +80) inductance deviation within +/-5.0%, after 96 hours
. Humidity characteristic: In 90 to 95% relative humidity at 40+/-2 and one hour drying under normal condition. Inductance deviation within +/-5.0% after vibration for one hour
. Vibration resistance: In each of three orientations at sweep vibration (10-55-10Hz) with 1.5mm p-p amplitude
. Similar to coil craft and Toko, Sumida, TDK and Murata brands
Changzhou Southern Electronic Element Factory Co., Ltd. is located in China, with a long history. We enjoy convenient transportation by highway, railway and airway. It takes only one and half hours' Drive to Shanghai or Nanjing.
Our company was founded in 1989, and currently we employ more than 300 people, including 60 professional technicians, covering an area of 10, 000 square meters, with a construction area of more than 5000 square meters. Our main products are wirewound resistors, wirewound resistor fuses, membrane fuse resistors, fixed inductors, filters, ferrite transformers, ring-shaped coils, fuse dedicated energy-saving lamps and UL fuses. Our annual output is 200 million resistors, 200 million transformers, 100 million coils and 200 million fuses, which are mainly used for household appliances, communication equipment, energy-saving lamps, automation control devices (such as inverters), power equipment and facilities. Our products are exported to Europe, the United States and Southeast Asia. GE, OSRAM and PHILIPS are our customers.
Factory' S quality policy: "product quality, service in advance, customer satisfaction".
Environmental policy: "to comply with laws and regulations, pollution prevention, environmental awareness, continuous improvement of the environment".
