building machinery
1 Lifting Technical Performance
1.1 Lifting characteristic list
(A)4-line
range (m) | 3-10.96 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 |
Load (t) | 4 | 3.986 | 3.638 | 3.343 | 3.09 | 2.87 | 2.68 | 2.51 | 2.36 | 2.23 |
range (m) | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 |
Load (t) | 2.106 | 1.996 | 1.897 | 1.806 | 1.723 | 1.646 | 1.576 | 1.510 | 1.449 | 1.393 |
range (m) | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 |
Load (t) | 1.34 | 1.29 | 1.24 | 1.200 | 1.159 | 1.121 | 1.084 | 1.050 | 1.017 | 0.986 |
range (m) | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 46.8 | | |
Load (t) | 0.957 | 0.929 | 0.902 | 0.877 | 0.852 | 0.829 | 0.807 | 0.790 | | |
(B) 2-line
range (m) | 3-20.97 | 21 | 22 | 23 | 24 | 25 | 26 |
Load (t) | 2 | 1.996 | 1.897 | 1.806 | 1.723 | 1.646 | 1.576 |
range (m) | 27 | 28 | 29 | 30 | 31 | 32 | 33 |
Load (t) | 1.510 | 1.449 | 1.393 | 1.34 | 1.29 | 1.24 | 1.200 |
range (m) | 34 | 35 | 36 | 37 | 38 | 39 | 40 |
Load (t) | 1.159 | 1.121 | 1.084 | 1.050 | 1.017 | 0.986 | 0.957 |
range (m) | 41 | 42 | 43 | 44 | 45 | 46 | 46.8 |
Load (t) | 0.929 | 0.902 | 0.877 | 0.852 | 0.829 | 0.807 | 0.790 |
1.2 Performance and Technical Parameters List of Crane
Item | unit | multiplying factor | |
α=2 | α=4 | |
Rated lifting torque Kn.m | KN.m | 400 | |
max. lifting capacity | t | 2 | 4 | |
working range | m | 3 - 46.8 | |
lifting capacity at jib tip | t | 0.79 | |
max. Capacityon jib range | m | 20.97 | 10.96 | |
crane height | free standing | m | 30 | | |
with wall tie in | 120 | 60 | | |
| |
outline dimension | foundation frame | m | 6.0×6.0 | | |
Total height | free standing | 38.284 | | |
with wall tie in | 120 | | |
| |
jib tip to slewing center | 47.74 | | |
| |
counter arm tip to slewing center | 12.816 | | |
dead load | free standing | t | 21.5 | | |
with wall tie in | t | 42.7 | | |
counter weight | t | 7.2 | | |
others | total motor power | kW | 25.82 | |
Allowed wind scale | windscale | ≤6 | |
allowed working temperature | Deg c | -20~40 | |
| | | | | | | | | | | | |
mechanism table
mechanism load | Lifting Mechanism | JC 40% |
Slewing Mechanism | JC 40% |
Trolley Traveling Mechanism | JC 40% |
lifting mechanism | motor | type | YZTD225-4/8/32 |
Rotator speed | r/min | 1400 | 700 | 140 |
power | kW | 15 | 15 | 3.5 |
reducer | center distance | mm | 460 |
driving ratio | i | 12.25 |
roller | diameter | mm | Φ330 |
rolling layer | layer | 4 |
line capacity | m | 280 |
rotator speed | r/min | 114 | 57 | 11.4 |
Brake | type | YWZ-250/45-10 |
brake force | N | 450 |
wire rope | pull force | N | 10000 |
dimension | 6×19-11-1770-I |
lifting speed | m/min | 65.1/31.9 | 32.6/15.9 | 13.0/6.4 |
rated lifting capacity | t | 0.8/1.6 | 2/4 | 2/4 |
steady decline lowest speed | m/min | ≤7 |
dead load | t | 1.2 |
Slewing mechanism | motor | type | YD132M-4/8 |
Rotation rate | r/min | 1440 | 720 |
Power | kW | 4.5 | 3 |
reducer | type | XX-10.180 |
Transmission ratio | i | 180 |
outlet torque | N·m | 8000 |
slewing bearing | type | HSW.30.1220 |
| pinion | modulus | m | 10 |
teeth | z | 13 |
modification coefficient | x | +0.5 |
hydraulic coupling | type | YOX250A |
slewing speed | r/min | 0.75 | 0.38 |
amount | unit | 1 |
Ranging mechanism | motor | type | YD100L2-4/6 |
rotation speed | r/min | 1440 | 960 |
power | kW | 2.2 | 1.5 |
reducer | type | WCJ120 |
transmission ratio | 39 |
wire rope | dimension | 6×19-7.7-1550 |
rope speed | m/min | 38.6/25.2 |
ranging speed | m/min | 38.6/25.2 |
hydraulic tank station | hydraulic pump station | working pressure | MPa | 20 |
power | kW | 3 |
type of oil tank | GB306 |
hoisting oil tank | rated pressure | MPa | 20 |
diameter of oil tank | mm | Φ125 |
diameter of pole | mm | Φ90 |
traveling distance | mm | 1300 |
installing distance | mm | 1700 |
hoisting speed | m/min | 0.4 |
max. hoisting force | t | 24.6 |
2.Description of QTZ series tower Crane
1) the tower crane is one of the most popular type and hot-selling self-erecting tower crane, which is researched and designed by Institute of Building Mechanization of China Academy of Building Research. It absorbs many advanced technology both from China mainland and abroad.
2) We adopt to use Dual drawbars structure on lifting boom, which enables the lifting boom to be unfer no stress at lifting surface other than uniaxial stress, and moreover, it gets rid of the stress peak. It greatly improves the fatigue safety performance of lifting boom.
3) Adopts VVVF stepless speed variation device for lifting, radius changing and slewing mechanisms, to make sure it works steadily and effectively, it also lowers the maintenance cost.
4)We can offer crane standard sections such as the FO/23B standard sections for customers to choose from.
3. Service
1.) Providing timely delivery, standby engineers are ready to solve any problems
2.) Providing 12 (twelve only)months product warranty period,with ample spare parts
3.) Providing work site installation guidance and training of operation and maintenances
Jinan Hengsheng Engineering Machinery Co., Ltd. is a large scale construction machinery manufacturer.
Our main products are tower crane, boom crane, flat top crane with common motor or VFD type. Elevator, construction elevator, hoist, builder's hoist, pellet mill, crusher, mixing machine, wood chipper, hammer mill and accociate products like cooling machine, drying machine and screening machine.
The company has more than 1200 staff, featuring abundant technical force, excellent manufacturing facilities and perfect detection method. The plant covers 255, 000 square meters.
Our company has been granted with the GB/T19001-2000 idt ISO9001: 2000 Certificate of Conformity of Quality Management System, the People's Republic of China special equipment manufacturing license, CE, GOST and other certifications. Products have been exported to Russia, Mongolia, Moldova, Georgia, Turkey, Egypt, India, United Arab Emirates, Algeria, Angola, Mexico, Brazil and other countries, and have enjoyed good reputations from the users.
Hengsheng will offer you machinery with first class technology and first class service for your trust and satisfaction.