Aluminum Alloy Families
1xxx Series Al (³ 99.0% purity) Alloys
· Excellent corrosion resistance
· High thermal and electrical conductivities
· Low mechanical properties
· Excellent workability
· Non-heat treatable
· Moderate increases in strength are attainable with strain hardening
· Common alloy is 1100
3xxx Series Al-Mn Alloys
· Widely used as general purpose alloys for moderate strength applications requiring good workability
· Non-heat treatable with about 20% more strength, comparable corrosion resistance, but lower thermal and electrical conductivity than 1xxx series alloys
· Alloy 3003 is commonly used in food processing, chemical/power plants and heat exchangers
4xxx Series Al-Si Alloys
· Alloy 4032 is the only commonly used forging alloy of this series
· Heat treatable
· Low coefficient of thermal expansion
· High wear resistance and fair corrosion resistance
· Typical uses are for pistons and other high temperature service parts
5xxx Series Al-Mg Alloys
· Excellent corrosion resistance
· Moderate-to-high strength
· Potential to be hardened
· Good toughness at cryogenic temperatures and weldability
· Uses include cryogenic tanks, marine and construction applications
· Representative alloys include 5052, 5083, 5086, 5383 and 5456
6xxx Series Al-Mg-Si Alloys
· Heat treatable alloys with good formability, corrosion resistance and weldability and machinability
· Medium strength, although not as strong as most 2xxx and 7xxx alloys
· Alloy 6061 is the most common of these alloys and is considered to be the workhorse of the forging industry
· 6xxx alloys find a broad range of applications including aerospace, construction, marine and pipelines
| Alloy No. | Thickness
(mm) | Width
(mm) | Length
(mm) | Temper |
| A1050, A1060, A1070, A1100 | 0.2-100 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26, etc |
| 3A21, A3003, A3105, A3004 | 0.2-100 | 20-2200 | 20-8000 | O, H14, H18, H24, etc |
| A5052 , A5005, A5083, A5754 | 0.2-100 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 , etc |
| A6061, A6082, A6063 | 0.2-200 | 20-2200 | 20-8000 | T4, T6, T651, etc |
| A8011 | 0.2-100 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26, etc |
| Packing : Export wooden pallets. |
| Standards: ASTM-B209. EN573-1, GB/T3880.1-2006 |
| Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
| Payment term: | 30% TT as deposit and the balance should be paid by L/C or against copy of B/L |
|
|
| Delivery Time | 15 days after 30% T/T payment or receiving L/C copy |
Tianjin Yitejia Steel Sales Co., Ltd. is specializing in supplying stainless steel sheet, stainless steel coil, stainless steel plate, steel plate, seamless steel tube etc.
We can supply high quality products, good service and competitive price. We have been devoted to stainless steel production such as stainless steel plate/sheet, stainless steel coil&stainless steel bar, and processing of stainless steel, special steel and high grade carbon steel. Main material are 201, 202, 301, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 316Ti., 409L, 410, 410S, 416, 420, 420J1, 420J2, 430, 436, 439, 441, 444, 446 etc. Key products have entered into key fields and new industries such as petroleum, chemical industry, shipbuilding, container, railway, automobile, urban light rail transit, large power stations and so on.
We have an excellent sales team, and we sell our materials to all of our country as well as all over the world, we have exported our materials to Brazil, Turkey, Italy, Russia and many Asian countries, we have won good reputation from all our customers.
Our aim is to be the most reliable supplier in the supply of stainless steel products all around the world. We wish to extend our warm welcome to our customers, old and new, both at home and abroad, to negotiate business with us on the basis of equality and mutual benefit. We hope to develop with all of our customers.
