2.4G Touch Screen RGB LED Control System

This system is a high-performance RGB LED touch remote controller, adopting the most advanced PWM control technology, controlling all RGB LED products with four lines and three circuits( common anode), owning 640 thousand colors and 20 automatical changing modes to choose.
Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in LED RGB strip light, LED module and so on.
With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high speed telecommunications, etc.
The remote looks fashionable and elegant, with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use.
The modular design and easy screwed terminals enable the controller easy to match with all kinds of LED light products.

Programming(code clearing and code matching )

Code matching:
For a new kit ( remote& controller), the remote can work only when it is programmed to the controller.

Please follow the below instructions:
Confirm if it is correct that the connection between power supply, LED controller and LED load.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)

The moment you see the light is on. The LED light blinks three times slowly when it is done.

Code clearing:
The code can be cleared as needed.
The kit (remote and controller) will stay in the original state after code clearing.
It can work when code matching is done.
Please follow the below instructions:

Also, Confirm if it is correct that the connection between power supply, LED controller and LED load.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
The moment you see the light is on. The LED light blinks six times swiftly when it is done.

Note:
01). The regular product for sale is a kit (remote and controller).
The user can re-programme freely as needed. One remote can control countless controllers, but one controller can only be controlled by four remotes (Max).

02). Please check the battery installation and controller(totally discharge the power), when you programme after switching off and switching on.