SE900 professional audio driver for big frequency 80W
1). Top performance 1.4" high frequency compression driver.
2). The particualr mylar/titanium diaphragm using a 3" edge wound flat aluminium Wire voice coil And a FEA computer optimzed lightweight Neodymium magnet assembly Using a copper shorting ring produce smooth response.
3). High efficiency and outstanding sonic properties.
4). Light weights: 2.6kg.
5). Throat Diameter: 36mm (1.4 in)
6). Nominal Impedance: 8 Ohm
7). Minimum Impedance: 8.3 Ohm
8). Nominal Power handling (1000-20000Hz): 80W
9). Continuous Program: 160W
10). Sensitivity (1W / 1m): 109.5dB
11). Frequency Range: 0.5-18kHz
12). Recommended Crossover: 1200Hz
13). Voice coil Diameter: 75mm (3 in)
14). Winding Material: Aluminium
15). Inductance: 0.14mH
16). Diaphragm Material: Titanium
17). Flux Density: 2.05T
18). Overall Diameter: 132mm (5.2 in)
19). Depth: 65mm (2.6 in)
20). Net Weight: 2.6kg (5.7 lb)
21). Shipping Weight (4 units): 11kg (24.2 lb)
22). Shipping Box (4 units): 300*160*180mm (11.8*6.3*7.1 in)
23). 2 hours test made with continuous pink noise signal (6dB crest factor) within the specified range. Power calculated on rated minimum impedance.
24). Power on continuous Program is defined as 3 dB greater than the Nominal rating.
25). Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 500 to 18000Hz.
26). 12dB / oct. Or higher slope high-pass filter.
|
Frequency Response: |
32Hz-180Hz(± 3dB) 30Hz-250Hz(-10dB) |
|
Nominal Coverage: |
Omnidirectional |
|
Sensitivity (@1w/1m): |
99dB SPL |
|
Power Rating (AES): |
700W |
|
Nominal Impedance: |
8Ohm |
|
Maximum SPL: |
127dB (continuous)133 dB(peak) |
|
Drivers: |
1*18” (100mm voice coil) subwoofer |
|
Dimension (H*W*D): |
706*561*600mm |
|
Weights: |
42kg |
|
Connectors: |
2*NL4MP Neutrik Speakon connectors |
|
Speaker Cables: |
1+1- |
|
Materials: |
18mm, 24mm birch multi-plywood |
|
Finish: |
Black water paint |
|
Grille: |
Black epoxy mesh grille with acoustically reticulated foam |
|
|
|
Guangzhou Zsound Proaudio Technology Co., Ltd.Specilizes in developing and manufacturing a wide range of superior, advanced technology loudspeakers for the professional touring and installation market.With more than ten-years R & D experience, we've successively achieved numerous patents for Zsound speakers.
Designed and constructed to exacting specifications, every component of Zsound loudspeaker is critically extracted.This meticulous craftsmanship and attention to detail shows how seriously we believe in our ideas.Our pursuit for sonic excellence LED to an outstanding reputation in this industry.
During the long-term persistent efforts, Zsound loudspeakers are extensively used in rental and installation markets for events, multimedia, musicals, concert halls, theatres, broadcast and many other applications from the smallest conference room to the largest stadium.
