Tempered Glass Steam Shower Room

Product name: Shower room, steam shower room, computer controller luxurious steam shower room with massage bathtub and TV DVD, shower room with steam, shower room with sauna, steam room with TV

We are professional with pool equipment, SPA equipment, sauna steam rooms equipment and music dancing fountains, outdoor / indoor massage bathtub SPA tubs. Welcome to contact me with no hesitate if you are interested in them!

*****Tempered glass steam shower room:
1, Good quality
2, Factory price
3, With massage nozzle
4, Different styles

...Shower room size: 900*900*1800mm
...Package size:
950*950*200mm
1980*620*520mm
...Volume: 0.16 cbm

*****CLEANING
∞ ∞ Generally, use the cloth which soak by litmusless detergent(light scour, soap and water)can clean the shower cubicle.
∞ ∞ Do not use strong deliquescent substance like strong scour, alcohol, gas, acetone and so on.
∞ ∞ If the smutch is bad and heavy, you can use low consisitency acetum, but must clean by water finally.

*****INSTALLATION
(Tool need: Level gauge, pencil, cross-head screw driver, Iron hammer, percussive drill, tape measure, movable wrench, silicon glue water gun, dimeter 6 aiguille)
STEP1:
∞ Put the shower tray on the right place and adjust feet to the level position by level gauge;
∞ Please confirm the wasted drainage position

STEP2:
∞ Put the movable glass door on the bottom crock, line up the drilling sites of lower track and bottom crock, and fix the movable glass door tightly with 3 ST 4*12 self-tapping screw.
∞ Adjust the pulley with screw driver and spanner as shown in the drawing to make the push-and-pull of movable glass door smooth and ensure there is no gas between the two doors when being shut.

STEP3:
∞ Put two pieces of side glass on bottom crock, line up the drilling sites of side glass and movable glass door, and those of side glass and bottom crock.
∞ Fasten the side glass and movable glass door tightly with 10 ST 4*12 self-tapping screws.
∞ Fasten the side glass to bottom crock tightly with 2 ST 4*12 self-tapping screws.

STEP4:
∞ Put the functional aluminum alloy on underchassis, line up the drilling sites of side glass and lightening post functional board (aluminum alloy), and fasten the functional aluminum alloy to side glass tightly with 10ST 4*12 self-tapping screws.

STEP5:
∞ Place the top cover on booth body and line up screw drilling sites, then connect the top cover with backboard with the use of M6*30 machine screws and M6 nuts(ten for each), and fasten it to the upper track of movable glass door with 5ST 4*16 self-tapping screws
∞ Connect the shower head and sole massage to backboard with hose and place them on the designated position of booth body.
∞ Connection of water circuit: Connect spray nozzle, massage, shower head and top spray nozzle with water faucet separatcly according to the drawing
∞ Connection of electric circuit: Connect the electric wires according to there colors