Categories
Price: | US $ 480-500/Piece |
---|---|
Trade Terms: | FOB,CIF,EXW |
Min Order: | 1/Piece |
Pay Type: | L/C,T/T,Western Union |
Cooling Water Processor Water Filter for Sea Water
How It Works
The unit consists of two stages of filtration, a coarse pre-filter and a stainless steel fine screen.
The unwanted solids accumulate on the inner surface of the fine screen, building up a filter cake, which filters out even finer particles, creating a pressure differential. Once the pressure drop reaches a preset level, a rinse cycle is activated by the factory supplied control system.
The solids are removed from the fine screen using a spot backwashing method, which aggressively sucks the dirt off the screen, similar to a vacuum cleaner, and are carried to the drain via the rinse valve. The dirt collector rotates, ensuring the entire screen is cleaned each cycle. The process takes a matter of seconds, without interruption of system flow.
Control method
Filter has differential switch and integrator. Once the pressure drop reaches a preset level, a rinse cycle is activated by the PLC controller.
Feature
structure compact
low water consumption
fine filter degree
low pressure drop
Application
1.Chilling water treating: such like cooling tower, water supplement system, air conditioning system, heat exchange system.
2.Raw water treating: such like surface water, lake, sea water, tank water, well to remove grind, sand, algae, organism etc.
3.Cycling industry water: cooling tower, polishing process water, ion exchange water, spraying process water, heat exchange plant, rolling plant, casting plant etc.
4.Irrigation: farm, dip field, golf, lawn etc.
5.Recycle water
Parameter
Install way | Vertical installation |
Unit capacity | 15-900T/H, Achieve parallel install to achieve big capacity |
Min work pressure | 0.25Mpa |
Max work pressure | 1.0Mpa,1.6Mpa |
Micron | 20-500um |
Control way | Differential pressure, time and manual |
Max temperature | 65ºC (reach to 100ºC if required) |
Back wash time | 60-120S |
Rotating speed | 14-20rpm |
Clean way | Scanning type |
Differential pressure in cleaning | 0.01-0.08Mpa |
Back wash water consumption | Approximate 500kg |
Voltage | AC220V 380V,50Hz,3PH,Controller: 220V |
Motor power | 0.37Kw |
Material | Carbon steel with anti-corrosion painting |
Screen | 316SS (Woven, ,multi-layer sintered, wedge) |
Drain valve | cast ion with antir-corrosion painting |
PLC controller |
Model | Pipe | T/H | Filter area(cm2) | Drain(mm) | Water consumption (L) | motor(KW) | weight(KG) |
XLQ-200XT | 200 | 300 | 7500 | 50 | 250 | 0.55 | 340 |
XLQ-250XT | 250 | 450 | 11000 | 80 | 400 | 0.55 | 350 |
XLQ-300XT | 300 | 650 | 11000 | 80 | 400 | 0.55 | 365 |
XLQ-350XT | 350 | 900 | 13800 | 80 | 400 | 0.55 | 630 |
XLQ-400XT | 400 | 1200 | 13800 | 80 | 400 | 0.55 | 650 |
XLQ-450XT | 450 | 1500 | 13800 | 80 | 400 | 0.55 | 690 |
Install requirement
1.Keep space for filter install and maintenance.
2.Drainage pipe length not longer than 20m. Avoid more turns off, keep outlet pipe parallel with ground.
Testing
1.Close inlet outlet valve before testing. Open by-pass valve. Wash dirties staying in pipes.
2.Open inlet valve gradually. Let water into filter till air comes out from filter house.
3.Check leak at joint part, check in/outlet pressure gauge. Connect power when comes to system pressure.
4.Set up drainage time based on system pressure data.
5.Open outlet valve gradually if testing is normal. Close by-pass valve back to normal filtering.
6.Observe several differential pressure changes and drainage. Finish testing if normal.
Notice in using
Equipment can through into operation directly, as already has trial testing. Users can adjust settings based on actual use. Change relay's program and parameter is forbidden.
1st operation notice
Follow below steps in 1st operation:
Check drainage pipe connection. No up-inclined angle.
Check connection tighten or not.
Check control box in a dry environment.
Connect power cord, green light means normal. Make sure electrical parts is dry. Water is forbidden into control box.
Prod Model: | XLQ |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Material: | Carbon Steel, 304ss or 316L |
Application: | Water Filter |
Filter Rating: | 30-3000 Um |
Filter Area: | 1500-13500 Cm2 |
Power Supply: | 550W |
Electricity: | 220V, 380V, According to The Customer Request |
Control Way: | PLC or Not |
Flow Rate: | 15-900t/H |
Certificates: | ISO9000, SGS |
Motor: | 14-20 Round Every Minute |
Motive Force: | Electric power |
Usage: | Chemical Industry |
Certification: | SGS, ISO |