2 Part Epoxy Adhesive for Potting (ZR102)

Price:	Negotiable/Piece
Trade Terms:	FOB
Min Order:	200kilogram
Pay Type:	L/C,T/T,Western Union

Contact Supplier

Showroom Product Company Profile

2 part epoxy adhesive for potting

1. ZR102 Epoxy potting gum is a room temperature/heating cured epoxy resin. This kind of two-component epoxy adhesive used for design, protection the high strength or confidential electronic products.
2. ZR102 Epoxy potting glue curing without heating. To 4: 1 (weight ratio) completely mixed part A and part B, curing in a certain time, and form protection.
3. After curing glue has the following characteristics:
4. Against moisture, dirt and other atmospheric composition
5. High strength
6. Has confidential role
7. Solvents, no cure by-products
8. Have stable mechanical and electrical properties between -45º C-120º C
Operation time is a quantity of cement with 100 g.

A, B two components in proportion to remove mixing ratio, mixing, vacuum suction bubble in operation period, remove the potting products to casting, such as potting product is too big, suggest points potting, then according to The Times curing(80º C/90min or 25º C/10hr)

Operation caution:
2 part epoxy adhesive for potting
1. Agent A place for a long time, maybe produce precipitation, mix part A and B access should be paid attention to save after sealing.
2. Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
3. Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
4. Temperature is too low will lead to curing speed partial slow, heat cure advice; Potting thickness more than 2 cm above 80 º C not directly in the curing, lest cause explosive together.
5. This glue curing exothermic reaction, match the process as the quantity of cement can affect the operation, so the length of time with 100 g resin content of operation time is only a reference time.

Packing:
Agent A: 25 kg/pail; Agent B: 10kg/pail
Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shelf life Agent A: 1 year, Agent B: Months(25º C).

Conventional performance:
test item	testing standard	unit	A	B
Outside view	visual inspection	---	Black viscous liquid	Brown liquid
viscosity	GB/10247-2008	mPa@s(25ºC)	15000-35000	100-150
density	GB/T 13354-92	g/cm 3 (25ºC)	1.75	1.14

Operation process:
test item	unit	value
mixture ratio	weight ratio	100:25
mixture ratio	volume ratio	100:40
Mixed viscosity	mPa@s(25ºC)	700-1200
Mixture density	g/cm 3 (25ºC)	1.57
operation time	min(25ºC)	40
curing time	ºC/hr	80/1.5or 25/10

Typical performance:
test item	testing standard	unit	value
hardness	GB/T 531.1-2008	Shore D	80
conductivity factor	GB/T 10297-1998	W/mK	0.4
expansion coefficient	GB/T 20673-2006	μm/(m,ºC)	44
water absorption	GB/T 8810-2005	24h,25ºC,%	<0.1
dielectric strength	GB/T 1693-2007	kV/mm(25ºC)	>20
Loss factor	GB/T 1693-2007	(1MHz)(25ºC)	0.014
dielectric constant	GB/T 1693-2007	(1MHz)(25ºC)	3.53
volume resistance	GB/T 1692-92	(DC500V)Ω@ cm	1.2×10 15
Remark : All the above data come from 25 º C and 55% RH glue curing conditions after 7 days.

Prod Model:	ZR102
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Curing Time:	80/1.5or 25/10oc/Hr
Hardness:	80shore D
Conductivity Factor:	0.4 W/Mk
Water Absorption:	<0.1 24h, 25oc, %
Dielectric Strength:	>20kv/Mm(25oc)
Loss Factor:	0.014(1MHz)(25oc)
Dielectric Constant:	3.53(1MHz)(25oc)
Mixture Density:	1.57g/Cm 3 (25oc)
Mixed Viscosity:	700-1200mpa@S(25oc)
Operation Time:	40min(25oc)
Classification:	Thermosetting
Material:	Epoxy
Color:	Black
Characteristic:	Waterproof
Application:	Electronics

Shanghai Jorle Fine Chem Co., Ltd., is a manufacturer of Silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, Power, Electronics, New Energy and other industries.

The company is located in Songjiang Shanghai, has completed the annual capacity of 2000 tons, organic silicon epoxy adhesive 500 tons, polyurethane adhesive 300 tons, organic silicone oil 1000 tons, high temperature resistant epoxy resin 200 tons of production scale. In recent years, new on the liquid silicone rubber and pharmaceutical intermediates project, reaching the company's product line.

The company has 50 employees, bachelor degree above for 70% of the total number. The company has established a long-term and stable cooperation with East China University of Science and Technology, Fudan University, Shanghai University, etc. Provide a strong technical support.

"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and social development. Our goal is "to be the best supplier of electronic industry, silicone industry outstanding enterprise".

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

"Science and technology light the passion of Jorle", Jorle is the courage to pursue, and continuously exceeded, and actively innovative science and technology enterprises, we will unswervingly to the integrity as a link, build confidence in the bridge, hold hands with you and work together.