Categories
Price: | US $ 9-20kg |
---|---|
Trade Terms: | FOB,CFR,CIF |
Min Order: | 100kg |
Pay Type: | L/C,T/T |
Performance (under standard heat treatment) | ||||||||||
Variety | θ/C | Tensile property | Impact and hardness | Endurance property | ||||||
σb/ MPa | σp0.2/MPa | δ5/% | ψ/% | Aku/J | HBS | σ/ MPa | τ/h | δ5/% | ||
≥ | ≥ | |||||||||
Hot rolled bar Forged bar | 20 | 930 | _ | 20 | 40 | _ | 321~255 | _ | _ | _ |
550 | 785 | _ | 16 | 28 | _ | _ | 590 | 100 | _ | |
650 | 735 | _ | 15 | 20 | _ | _ | 390 | 100 | _ | |
Bar | 20 | 895 | 585 | 15 | 20 | _ | 341~248 | _ | _ | _ |
650 | _ | _ | _ | _ | _ | _ | 480 | 23 | 5 | |
Cold drawn bar | 20 | 900 | 590 | 15 | 20 | _ | 341~247 | _ | _ | _ |
650 | _ | _ | _ | _ | _ | _ | 450 | 23 | 5 | |
390 | 100 | 3 | ||||||||
Hot rolled plate | 20 | 880 | _ | 20 | measure | _ | _ | _ | _ | _ |
550 | 785 | _ | 15 | measure | _ | _ | _ | _ | _ | |
650 | 735 | _ | 15 | m easure | _ | _ | _ | _ | _ | |
Cold rolled plate | 20 | 882 | _ | 20 | _ | _ | _ | _ | _ | _ |
550 | 785 | _ | 16 | _ | _ | _ | 588 | 100 | measure | |
650 | 735 | _ | 15 | _ | _ | _ | 392 | 100 | measure | |
disk | 20 | 930 | 620 | 20 | 40 | 23.5 | 321~255 | _ | _ | _ |
650 | 735 | _ | 15 | 20 | _ | _ | 392 | 100 | _ | |
Forging disk | 20 | 930 | 615 | 20 | 30 | 23.5 | 321~255 | _ | _ | _ |
650 | _ | _ | _ | _ | _ | _ | 392 | 100 | _ | |
Ring blank | 20 | 950 | 620 | 20 | 40 | 23.5 | 321~255 | _ | _ | _ |
650 | 735 | _ | 15 | 20 | _ | _ | 392 | 100 | _ | |
Ring part | 20 | 930 | 620 | 20 | 40 | 23.5 | 321~255 | _ | _ | _ |
650 | 735 | _ | 15 | 20 | _ | _ | 390 | 100 | _ | |
Cold heading Cold wire drawing | 20 | 900 | 590 | 15 | 20 | _ | 341~248 (HV360~260) | _ | _ | _ |
930 | _ | 18 | 40 | _ | ||||||
650 | _ | _ | _ | _ | _ | _ | 451 | 23 | 5 | |
392 | 100 | _ |
Performance of high grade A-286 | |||||||||
Variety | θ/C | Tensile property | HBS | Combined endurance property | |||||
σb/ MPa | σp0.2/MPa | δ5/% | ψ/% | σ/ MPa | τ/h | τH/h | |||
Hot rolled bar | 20 | ≥1035 | ≥690 | ≥18 | ≥30 | 352~277 | _ | _ | _ |
650 | _ | _ | _ | _ | _ | 448 | ≥25 | >τ |
Chemical composition | |||||||
Element | C | Cr | Ni | Mo | Al | Ti | Fe |
Mass fraction | ≤0.08 | 13.50~16.00 | 24.00~27.00 | 1.00~1.50 | ≤0.40 | 1.75~2.35 | rest |
Element | B | V | Mn | Si | P | S | Cu |
Mass fraction | 0.001~0.010 | 0.01~0.10 | 1.00~2.00 | ≤1.00 | ≤0.030 | ≤0.020 | ≤0.25 |
Chemical composition of high grade A-286 | |||||||||
Element | C | Cr | Ni | Mo | Al | Ti | Fe | B | V |
Mass fraction | ≤0.08 | 13.50~16.00 | 24.00~27.00 | 1.00~1.50 | ≤0.35 | 1.90~2.35 | rest | 0.003~0.010 | 0.10~0.50 |
Element | Mg | Ca | Mn | Si | P | S | Cu | [N] | |
Mass fraction | ≤0.005 | ≤0.005 | ≤0.35 | ≤0.35 | ≤0.015 | ≤0.002 | ≤0.30 | ≤0.0100 | |
Element | [O] | Sn | Pb | Se | Ag | Tl | Te | Bi | |
Mass fraction | ≤0.005 | ≤0.005 | ≤0.0005 | ≤0.0003 | ≤0.0005 | ≤0.015 | ≤0.0001 | ≤0.00005 |
Varieties | Steel type Specifications mm | Precision alloy | Resistance Alloys for electrical heating | Super alloy | Welding wire | Corrosion resistant alloy | |
Rods | hot rolling rods | Φ8~38mm | available | available | available | ||
Cold-drawn rods | ≤50mm | available | available | available | |||
Forged rods | Φ38~350mm | available | available | available | |||
Wires | Round wires | Φ0.3~8mm | available | available | available | available | available |
Non-circle wires | Negotiation | available | available | available | |||
Strips | Cold rolling | 0.15~4×200mm | available | available | available | available | |
Hot rolling | 4~22×200mm | available | available | available | available | ||
Plates | Cold rolling | 0.5~4×1000×2000mm | available | available | available | ||
Hot rolling | 4~22×1000×2000mm | available | available | available | |||
tubes | Φ4~63×0.5~5mm | available | available | ||||
Executive standard: GB, GJB, HB, YB, ASTM, AMSE, negotiation and so on. |
Prod Model: | GH2132 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Carbon Content: | Low Carbon |
Product Type: | Bar, Wire, Strip, Sheet, Plate, |
Material: | Fe-Ni-Cr |