ZR6330 epoxy adhesive for electronic
ZR6330 epoxy adhesive for electronic is a kind of room temperature/heating cured epoxy resin glue. This kind of two-component epoxy adhesive design for bonding ceramics, the metal, glass, plastic, rubber, paper, cloth, etc.
ZR6330 epoxy adhesive for electronic without heating can cure. To 1: 1 (weight ratio or the volume in the mixture thoroughly A part A and part B, curing in a certain time, and form protection.
After curing has the following characteristics:
Against moisture, dirt and other atmospheric composition
High strength
Excellent adhesive ability
No solvents, no cure by-products
Have stable mechanical and electrical properties between -45° C-90° C
A, B two components in proportion to remove mixing ratio, mixing, and then based on the (80 º C / 30 min or 25 º C / 1.5 hr) can be cured
Operation caution:
Part A and Part B save after sealing.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Temperature is too low will lead to curing speed partial slow, heat cure advice.
This glue curing exothermic reaction, match the process as the quantity of cement can affect the operation, so the length of time with adhesive volume under 10 g operating time is only a reference time.
Packing:
Agent A: 10kg/pail; Agent B: 10kg/pail
Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shelf life Agent A: 1 year, Agent B: Months(25º C).
|
Conventional performance: |
|
test item |
testing standard |
unit |
A |
B |
|
Outside view |
visual inspection |
--- |
Transparent sticky liquid |
Pale yellow viscous liquid |
|
viscosity |
GB/10247-2008 |
mPa@s(25ºC) |
10000-20000 |
5000-8000 |
|
density |
GB/T 13354-92 |
g/cm 3 (25ºC) |
1.10 |
1.10 |
|
Operation process: |
|
test item |
unit |
value |
|
mixture ratio |
weight ratio |
1:1 |
|
mixture ratio |
volume ratio |
1:1 |
|
Mixed viscosity |
mPa@s(25ºC) |
7000-15000 |
|
Mixture density |
g/cm 3 (25ºC) |
1.10 |
|
operation time |
min(25ºC) |
20 |
|
curing time |
ºC/hr |
80/0.5 or 25/1.5 |
|
Operation time is a quantity of cement with 100 g. |
|
Typical performance: |
|
test item |
testing standard |
unit |
value |
|
hardness |
GB/T 531.1-2008 |
Shore D |
80 |
|
shear strength |
GB 6328-86 |
Mpa,Fe |
12 |
|
shear strength |
GB 6328-86 |
Mpa,AI |
10 |
|
Expansion coefficient |
GB/T 20673-2006 |
μm/(m,ºC) |
44 |
|
water absorption |
GB/T 8810-2005 |
24h,25ºC,% |
<0.1 |
|
dielectric strength |
GB/T 1693-2007 |
kV/mm(25ºC) |
>20 |
|
Loss factor |
GB/T 1693-2007 |
(1MHz)(25ºC) |
0.014 |
|
dielectric constant |
GB/T 1693-2007 |
(1MHz)(25ºC) |
3.53 |
|
volume resistance |
GB/T 1692-92 |
(DC500V)Ω@ cm |
1.2×10 15 |
|
Remark : All the above data come from 25 º C and 55% RH glue curing conditions after 7 days. |
Shanghai Jorle Fine Chem Co., Ltd., is a manufacturer of Silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, Power, Electronics, New Energy and other industries.
The company is located in Songjiang Shanghai, has completed the annual capacity of 2000 tons, organic silicon epoxy adhesive 500 tons, polyurethane adhesive 300 tons, organic silicone oil 1000 tons, high temperature resistant epoxy resin 200 tons of production scale. In recent years, new on the liquid silicone rubber and pharmaceutical intermediates project, reaching the company's product line.
The company has 50 employees, bachelor degree above for 70% of the total number. The company has established a long-term and stable cooperation with East China University of Science and Technology, Fudan University, Shanghai University, etc. Provide a strong technical support.
"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and social development. Our goal is "to be the best supplier of electronic industry, silicone industry outstanding enterprise".
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
"Science and technology light the passion of Jorle", Jorle is the courage to pursue, and continuously exceeded, and actively innovative science and technology enterprises, we will unswervingly to the integrity as a link, build confidence in the bridge, hold hands with you and work together.
