The purpose of our distillation machine is refining industrial waste oil and used automotive lubricants (such as engine oil, hydraulic oil and gear oil) to clean oil, then reuse it. Distillation is the physical separation of components of lubricating oil by boiling range, depending on the type of distillation, the boiling range can produce gases, gasoline at the lower boiling points with heavy lubricating oil being distilled at higher boiling points, distillation is the corn process for a facility capable of producing refined base oil to virgin base oil quality.
The principle of the system: Keep the harmful part liquid and solid, the useful base oil become vapour state, separate from each other to get the useful parts.
The technical of the system: Vacuum pressure method, long path retention method and so on to regenerate the waste oil.
The parts of the system: 1. Waste oil pre-treatment system, 2. Vacuum distillation system, 3. Fine treatment and Blending system( should be ex-quotation)
1. Pretreatment system for waste oil: It is made up of primary filter, heater, pretreatment oil tank, pending oil tank, oil pump, vacuum source and other parts. During operation the oil needed to deal with will accomplish dehydration and degassing process, ready for next distillation.
2. Decompression and distillation system: It is made up of heater, compressing distillation tower, recycling pump, oil recovery device, oil-purified pump, highly speed and low vacuum machine set, cooler, etc. The waste oil will restructure useful elements and separate waste components.
Polishing and reconciling system: It is made up of fine filter and blending tank. As the customers have different and specified requirements, the usages of base oil dealt with are different. This system will be produced according to every customer's different needs.
The feature of the system:
1. It is not only an waste oil regeneration system but also an Environmental protection and energy saving project which is benefit to mankind
2. No chemical additives were introduced in processing, which leads to low operation cost
3. Due to the adoption of vacuum distillation technology, the oil temperature is far below than the boiling range under atmospheric pressure. It reduces the energy consumption and saves expenses during processing.
4. Use the waste oil as the cooling medium, to make the oil hot for the pre-treatment, also cooling the system. Save the water also.
5. The whole system is reasonable structure, simple operation and easy maintenance and the treatment of residues can be used as fuel or for other purposes
6. Direct heating is improving work efficiency, reducing the heat loss and saving energy
7. If need to heat waste oil in other ways, please indicate when ordering
China professional oil purifier manufacturer more than 18 years, design, make and sell middle and high quality oil purifier, . Such as transformer oil purifier, insulation oil purifier, turbine oil purifier, hydraulic oil purifier, refrigerant oil purifier, cutting machine oil purifier, lube oil purifier, fuel oil purifier, engine oil purifier, and so on.
There are 520 staffs in the company, including 46 specialist technicians. The company owns not only Qianneng Oil Purifier Manufacture Co., Ltd., also Qianneng Oil Purifier Research Institute and Qianneng Natural Gas.
The company can produce over 5000 sets all types of filters, having more than 1000 sets production facilities and 50 sets check equipments. For many years the company has widely absorbed advanced oil filtering and purifying technology both at home and abroad.
It has supplied a large quantity of oil filtering and purifying equipment to various power plants and stations and oil fields all over in China, and exported to Noth of America, Mexco, Chile, Peru, Uruguay, Canada, Australia, New Zealand, Italy, Dubai, Saudi Arabia, Jordan, Iraq, Iran, Singapore, Malaysia, Vietnam, Thailand, Bangladesh, Myanmar, Laos, Nigeria, South Africa^more than 80 countries and regions.
