T Type Brushaway Water Filter for Drinking Water Treatment

T Type Brushaway Water Filter For Drinking Water Treatment

1.Feature

*Filter precision from 100um to 3500um,big filter area,high sewage carrying capacity,
Customized product.

* Simple turn-of-a-handle cleaning of the filter screen,
Adjust the parameter of the automatic cleaning system.Automatic cleaning.

* Has motor overload protection, which can effectively protect the motor.

* Eliminates the need for turning off the water and extracting the filter screen for rinsing.
* No interruption of the process water flow during cleaning,
* Low pressure loss:Less than 1%.
* Easy to maintenance,installation and disassemble.
* Flange connections to the user's pipeline, national standard flange, versatility.

2.Application

1.Heating system, hot water circulation system.
2.Central air conditioning, chillers, cooling and refrigeration chiller water circulation system.
3.Industrial and civil cooling water, process cooling water circulation system.
4.Hot water bath, heating circulation system.

To protect the cooling equipment, heat exchanger, air conditioners, boilers and so on.The device is suitable for a wide range of industries, including construction, chemical, electric power, metallurgy, rubber, paper, textile,
Coal, food and other industries.

5.Metallurgy:Continuous casting water, high-pressure phosphorus in water, the net ring of water,
Muddy water filtration loop, cooling water full filter, next to the filter, nozzle protection

6.Electricity:Turbine cooling water filtration, gray water recycling filtration, dust nozzle protection, cooling tower water filter and next to the filter, such as whole Raw water:Lakes, rivers, reservoirs and water, well water, rainwater, groundwater extraction of sand, algae, organic filtration
7.Agriculture:Irrigation, drip irrigation water

Other:Construction, iron and steel, petroleum, chemical, electronics, power generation, textile, paper, food, sugar, pharmaceuticals, plastics, automotive industry, etc.

8.Widely used in drinking water treatment, construction circulating water treatment, industrial circulating water treatment, wastewater treatment, mining water treatment, water treatment and other areas of the golf course.

3.Technical Parameters

1.Treatment effectiveness
Filter precision:Customized
Filtration efficiency:99%;
Initial pressure loss:≤0.015Mpa.

2.Inlet Water Quality

Working pressure:1.0 / 1.6 / 2.5Mpa;
System pressure:≥0.4Mpa;
Working temperature:1 ºC -90 ºC;
Working environment temperature:1 ºC -50 ºC;
Relative Humidity:<95%.

3.Operating parameters

Mean time between failures:> 60,000 hours;
Design life:20 years for shell;8 years for electrical parts.
Power:0.2-0.6kw
Operating voltage:220V ~ 380V ±10%, 3-phase, 50 / 60Hz;
Safety insulation voltage:5000V.

Max Water Temperature	70  centigrade (Reach 100 centigrade    in special requirements)
Filter precision	50-500microns
Pressure loss	0.1-0.8bar
Max pressure	10bar, 16bar (Optional)
Control method	Pressure differential control,   time control and manual control
Filter flow	15-1000 CMB/Hour. If customer need higher flow, we suggest using many automatic sucking type filter parallel.
Backwash Time	60-120 seconds
Backwash Water Consumption	About 500 kg
Power	380.50Hz, 3 phase, Controller 220V
Power of Motor	Suction type 0.37Kw
Motor	14-20 round every minute
Filter chamber material	Resin covering carbon steel or stainless steel
Filter strainer	stainless steel (weave, stintering, wedges)

Model	Inlet diameter(mm)	inch	Flow rate(m3/H)
SLQ-2Y	50	2	19
SLQ -2.5Y	65	2.5	28
SLQ-3Y	80	3	50
SLQ-4Y	100	4	80
SLQ-5Y	125	5	125
SLQ-6Y	150	6	180
SLQ-8Y	200	8	320
SLQ-10Y	250	10	490
SLQ-12Y	300	12	710
SLQ-14Y	350	14	970
SLQ-16Y	400	16	1260

5.How to choose the suitable model

Please clarify below parameter:
1.Water flow rate
2.Chemical characteristic of fluid
3.SS of fluid
4.Filter precision
5.Pipe pressure
6.Working pressure
7.Direction of flow
8.Drainage way

6.Equipment Maintenance

A.After install the brushaway filter, the pipeline should be cleaned by banging pipes,to remove
The welding slag and other debris,to prevent damage caused by slag debris.Wash the filter after
Initial running for a week.

B.Runtime system for the first time, you should first open the supply valve, until the system is filled
With water, and then open the valve, in order to facilitate the removal of impurities in the pipeline,
To prevent access to the coil;

C.Timely sewage drain (especially in summer) according to the system set pressure
And concentration ratio.
D.In the dry state,it's prohibit to open device for a long time.During downtime or seasonal shutdown,
It should be wet protected,in avoid of pipeline corrosion.


        WELCOME TO INQUIRE ,WE WILL OFFER YOU THE BEST ITEMS !