Industrial Automatic Rapid Sand Filter for Circulating Water System

Description:
Rapid sand filtration can effectively remove suspended solids in the water and has significant effects on the removal of colloids, iron, organics, pesticides, manganese, bacteria, viruses and other pollutants in the water. besides advantages of small filtration resistance. large specific surface area, strong acid and alkali resistance, resistance to oxidation, PH scope of 2-13 and anti-pollution. As a unique advantages of the quartz sand filter, the filter is able to run self-adaptively through the optimization of the filter media and filter design, so that the filter material has a strong adaptivity to raw water concentration, operating conditions, pre-disposal process. i.e. the filter bed automatically forms a non-uniform state during filtration, which helps to guarantee the water quality under a variety of operating conditions and spread the filter material when backwashing, achieving good cleaning effect. The sand filter has advantages including fast filtering speed, high filtration precision and large interception capacity, etc. The filter is used in the industrial water, domestic water and municipal water systems requiring outflow turbidity of not greater than 5mg/I and complying with drinking water quality standards and for the removal of suspended solid sand solids in industrial wastewater: it can be used as ion exchange and pretreatment for softening desalination system and can also be used in the coarse filtration of water with undemanding industrial water quality, swimming pool circular processing system and cooling circulating water purification system.

 Rapid sand filtratio FAQ:
 
01.  What is the capacity(m3/h or gpm)do you require?
02.  How dirty the water is?
03.  How the water will be used once it is filtered,
04.  And the source of backwash water needed to clean the filters.
 
 
Rapid sanf filtration Main parameters
 
Rate of filtration:8~12m/h      
 
 Inlet NTU:≤15mg/L        
 
Out NTU:≤5mg/L
 
Working temperature:normal temperature    
 
Working pressure≤0.4Mpa  
 
Air flow F.A.D for backwashing:18~25L/ m2.S                    
 
Aircompressor. Max. Pressure:1~2kg/cm2
 
Backwash compressed air flow:15L/ m2.S(single floor),12L/ m2.S(double floor)                   Time of backwashing:5~10 minutes 

Rapid sand filtration Performance parameters
 

model	Filter diameter	Height	inlet-outlet	Filtration area	capacity
	mm	mm	mm	m²	m³/hour
YL-SF-500	500	816	40	0.2	6~10
YL-SF-600	600	874	40	0.28	8~14
YL-SF-700	700	900	40	0.38	12~19
YL-SF-800	800	960	DN50	0.50	15-25
YL-SF-1000	1000	1200	DN50	0.79	23-39
YL-SF-1200	1200	1400	DN80	1.13	33-55
YL-SF-1400	1400	1600	DN100	1.54	45-75
YL-SF-1600	1600	1800	DN100	2.01	60-100
YL-SF-1800	1800	1950	DN150	2.54	75-125
YL-SF-2000	2000	2150	DN150	3.14	95-155
YL-SF-2200	2200	2250	DN150	3.80	115-190
YL-SF-2400	2400	2100	DN150	4.52	130-210
YL-SF-2600	2600	2400	DN150	5.30	145-225
YL-SF-2800	2800	2500	DN200	6.15	155-240
YL-SF-3000	3000	2600	DN200	7.00	170-255
YL-SF-3200	3200	2800	DN250	8.15	270-320