1.8m Yh-1800s Eco Solvent Printer 1440dpi

1.8m YH-1800S ECO solvent printer 1440dpi


Daily maintenance of Printers:
Proper operation and maintenance can effectively extend the service life. Below is some routine maintenance and installation tips for Piezoelectric inkjet printers for your reference.
1) daily to keep the rubber blade ( cleaning scraping films please hairless woven scratch test piece, please do not squeeze, to avoid damage to the blade deformation ), ink stack ( sprinkler maintenance cap ) cleaning ( which the main effect is a photo machine does not work, the nozzle surface sealed to prevent surface drying caused by spray nozzle clogging )
2) nozzle surface must be kept clean to get the best print status, if it is found to have residual ink or dust, hairs and dirt adsorbed on the surface of the nozzle must be used soon dipped into special cleaning fluid or a soft non- woven tissue ash senior cover the surface of the nozzle must not wipe the dirt removal.
3) In order to avoid damage to the nozzle, prohibited the use of more than ordinary coarse crumbs of paper or cloth to clean the nozzles; Forbids any friction between the material and the nozzle;
4) raster Article: Photo machine at the top of the beam, the main role is to run the process of locating the ink vehicle role. Raster bar will be positioning allowed too dirty, playing figure may appear ghosting or misplaced. Gently wipe recommended at least once a month.
5) rails: There pictures of a straight beam track width of about one centimeter, Mexican trucks to run on top of the slider, the slider if the track is dirty exacerbate wear, Mexican trucks will produce abnormal wear after running slide sound effects and the impact of the plot. So to track cleaned once a week, after wiping the track, and then coated with a little sewing machine oil on its top, in order to play the role of lubrication to reduce friction and prolong the life of Mexican trucks slider.
6) Static pictorial work of great influence, ranging from not working properly, printing stops midway, or print garbled, weight will destroy the circuit board chips. To avoid static interference devices work, please install the standard requirements of the ground.
7 ) Regular cleaning pictorial surface and interior. In their daily work, the surface should be avoided or internal ink, alcohol and other active substances spilled photo machine.
8) device after the date the work is completed, to ensure that the head docked at the far right of the ink stack, and makes the ink nozzles and stacks ( sprinkler maintenance cap ) sealed; Daily work, when photo machine not working, do not sprinklers on the ink tank outside idle, this will cause the ink to dry and cause plug
9 ) equipment for a long time does not work or the day after the work is completed, the pressure required to lift the wheel lever to avoid prolonged pressure press wheel deformation affecting the paper feed precision;
10) Keep work area clean;
11) every three months on the pipeline and the ink sac ( ink bag is a white plastic with a metal filter inside the bladder Its main function is to filter impurities in ink, in order to avoid serious congestion can not wash nozzle opening; . Ink the side balloon is translucent film with a certain tension, the line of the ink can be sucked in the ink bag, the ink is supplied to the nozzle. ) for cleaning.