CAS No.: 55295-98-2
Product Name: Dye Wastewater Treatment Process of BWD-01
Chemical Name: Dicyandiamide formaldehyde resin
This product is a quaternary cationic polymer which is specialized product to treat effluent for color removal, flocculating and COD decreasing.
Application field:
1, It is mainly used for color removal treatment for high-colority wastewater from dyestuffs plants. It is suitable to treat wastewater with actived, acidic and disperse dyestuffs.
2, It can also be used to treat wastewater from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
3, It also can be used in the production process of paper&plup as rtention agent.
Specificationa:
1, Appearance: Light-color, sticky liquid
2, Viscosity: 50 - 250mPa. S (20º C)
3, Solid content: >50%
4, pH 30% solution: 3 - 5
5, Specific gravity: 1.2 - 1.3 (25º C)
Application methods:
1, Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, it can be precipitated or Air-floated to become clear water
2, pH index of the waste water should be adjusted to 7 - 10 for better Result
3 If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Package and Storage:
1, It is harmless, non dangerous material
2, It can be stored at room temperature, can not be placed in the Sun
3, 25kg pails, 250kg plastic drums and 1250kg IBC tank.
We are a leading water treatment chemicals company and we are supplying many kinds of chemicals for drinking water treatment and wastewater treatment.We have a lot of experience on production and application of water treatment chemicals.
Our main water treatment chemicals products are as follows:
Poly Aluminum Chloride (PAC), for drinking water treatment and wastewater treatment.
BWD-01 Water Decoloring Agent, for color removal for dying wastewater and for other wastewater.
Anionic Polyacrylamide(PAM)/Polyelectrolyte, for water treatment and sludge treatment.
Ferric Sulphate, for drinking water treatment and wastewater treatment.
PolyDADMAC, for water treatment and paper mills.
And other chemicals used for water treatment.
We supply high molecular weight Partially hydrolyzed polyacrylamide (PHPA) for oil/gas drilling additives and EOR process, we have big market in China and some foreign countries.We also supply CMC and PAC for drilling.
We are exporting our products to our customers in Europe, USA, and some Asian countries for many years.
