Honeycomb ceramic as the infrared combustion ceramic plate is made by the high purity cordierite material and used in the gas-fired stove where it saves 20%-50% energy cost and reduces more than 90% of the harmful gas emission. This product has good thermal shock resistance (no cracks on the product if the honeycomb ceramic with 1000 is in the water with 20 for 3 times), high mechanical strength (crushing strength is 20MPa on the top and 5MPa on the side), good endurance for high temperature, high resistance for erosion.
The gas combustion is occurred inside the holes of the Infrared Ceramic Plate, and the heat energy is radiated high-efficiently in the means of ultra-red rays, avoiding energy loss through visible light. For the advantages of high combustion efficiency, well distributed heating and low exhaust gas emission, Ceramic Combustion Plate is proved to be an environmentally friendly heating technology, and it is the idea technology to replace the traditional gas combustion technology.
If coated with a black catalyst, the honeycomb ceramic can transfer the heat by infrared radiation style and this combustion style has more outstanding advantages comparing to the normal gas-fired stove combustion as below:
*20%-50% energy saving
*Mixes oxygen completely with the gas, burning efficiently with no flame and little noise
*Operating safety without being influenced by wind when operating outdoor
*Decreasing the CO and NOx poisonous gas disposal and remove harmful
Advantages:
*Save 20-50% energy consumption
*Burn without flame, low noise
*Reduce the formulation of such harmful gas as CO, NOx, etc by a large margin (more than 70%)
*Strong bearing of wind, using safely
Physical Merits:
*Good thermal shock resistance ( no cracks after 3 times thermal shock from 800 ° C to cold water)
*High mechanical strength ( crushing strength is 20MPa on the top and 5MPa on the side)
*Good endurance for high temperature
*High resistance for erosion
Application: Widely used in various burners, ovens, fryers, heaters and barbecue set which burn gas
|
Hole |
Round hole |
Square hole |
|
Material |
cordierite |
cordierite |
|
Volume density |
0.45-0.65g/L |
0.45-0.65g/L |
|
Hole density |
300-320 hole/in 2 |
260 hole/in 2 ,280 hole/in 2 ,320 hole/in 2 ,520 hole/in 2 |
|
Wall thickness |
/ |
0.18-0.23mm,0.28-0.33mm, 0.35-0.40mm |
|
Length of side of hole |
/ |
1.06mm,1.13mm,1.2mm |
|
Hole diameter |
1.12mm,1.25mm,1.42mm |
/ |
|
Distance between Two Holes Axis |
1.8mm,2.2mm,2.7mm |
1.33-1.59mm |
|
Open hole ratio |
33.5-46.5% |
63.5-73.5% |
|
Water-absorbing rate(%) |
> 46% |
> 40% |
|
thermal expansion coefficient |
2.0-2.3 × 10 -6 |
2.0-2.5 × 10 -6 |
|
Heat stability |
850 ° C--25 ° C, do not crack in three times |
1200 ° C--25 ° C, do not crack in the condition of reduplicate cooling |
|
Highest Working Temperature( ° C) |
> 1375 ° C |
> 1375 ° C |
Compression Strength
(Lengthways) |
>13.0Mpa |
>10.0Mpa |
Compression Strength
(Horizontal) |
>6.0Mpa |
>3.0Mpa |
|
Rotundity shape |
Ellipse shape |
|
Specificationmm |
Number of channels (holes /square inch) |
Specification (mm) |
Number of channels (holes /square inch) |
|
Φ 83 × 85 |
400 |
T146.8 × 77 × 86.4 |
400 |
|
Φ 144 × 152.4 |
400 |
T120.6 × 80 × 152.4 |
400 |
|
Φ 100 × 100 |
400 |
T169.7 × 80.7 × 76.2 |
400 |
|
Φ 130 × 130 |
400 |
T144.8 × 81.3 × 152.4 |
400 |
|
Φ 118 × 150 |
400 |
T144.8 × 81 × 76.2 |
400 |
|
Φ 103 × 100 |
400 |
T169.7 × 80.7 × 101.6 |
400 |
|
Φ 150 × 75 |
400 |
T144.8 × 81.3 × 100 |
300 |
|
Φ 83 × 125 |
400 |
T127 × 63.5 × 107 |
300 |
|
Φ 150 × 150 |
300 |
T144.8 × 81.3 × 70 |
300 |
|
Φ 120 × 100 |
300 |
T144.8 × 81.3 × 150 |
300 |
|
Φ 101.6 × 100 |
300 |
Race track shape |
|
Φ 94 × 100 |
300 |
P120.65 × 80.01 × 76.2 |
400 |
|
Φ 85 × 70 |
300 |
P120.65 × 80.01 × 76.2 |
200 |
|
Φ 93 × 76 |
200 |
P144 × 68 × 150 |
400 |
|
Φ 118 × 76 |
200 |
P125 × 80 × 100 |
400 |
Beihai Xiaoming International Imp&Exp Co., Ltd Established in 2008, which is a Private High-tech company. It cooperate with and invest to make to the funds in form of company in A large-scale enterprises, BoCent Advanced Ceramic Co., Ltd. This corporation is the biggest enterprise which devote to High-tech at saving energy and environmental field. BoCent Advanced Ceramic is professional manufacturer for environmental ceramic product, such as storage filter, foam filter, DPF and catalyst converter, infrared burning plates. As one of Shareholders, Beihai Xiaoming primarily responsible for Overseas Market Operation.
With the speedy development of solar industry, Beihai Xiaoming International Imp&Exp Co., Ltd interested to set foot in the Great Green Solar Industry and built up manufacture base in Nanning for research & develop, manufacture and sell solar modules, solar power supply system, solar lighting system, solar pumping/ irrigation system and other solar application products etc. The base covers and area of 3600 square meters with luxurious show room and dust-free workshop, equipped with many kinds of high advance and sophisticated devices and instruments
Beihai Xiaoming International Imp&Exp Co., Ltd is in the production, sales as a whole, and in cooperation with a number of large Group companies of major export commodities operated enterprises with a good reputation. For many years, with exports to Europe, and many countries in Southeast Asia, and received high praise.
We have a number of domestic and international famous academia senior adviser, own an innovation R & D team and sales elite. We have an excellent team of R & D\Production\Management and Sales, with passionate and responsibility. Currently, we have applied more than 30 patents for products developed and got certificates issued by international authorities such as TUV, IEC, UL, CE.
With the spirit of innovation during R&D, we were, we are and we will always be perfecting our products with the philosophy of " science, precision, accuracy and high efficiency". We hereby make our commitment: We offer our clients with the most effective and satisfying service, and this is our every person in our company to constantly pursuit.
