Crylic Acid Surface Coating

Intended Uses   It has good weather resistance and durability, film has wear resistance, collision resistance, sea water resistance and other animal and vegetable oil, excellent construction performance and good color retaining performance. It is apllied to various land steel structure surfaces of hull, ship superstructure, power plant, iron and steel plant, chemical plant, bridge, container, hydraulic steel gate and waterless gasholder as protective and decorative surface paint. Product Description   It is prepared bycrylic acid resin, chlorinated plasticizer,coloring pigment, auxiliary and organic solvent.(Various colors) Product Information   Volume Solids: 45% Dry Film Thickness:50 microns Theoretical Coverage:175~220g/,5.71/L (calculated by 50um dry film) Practical Coverage:Allow appropriate loss Application  Details   Method of Application:        Airless Spray:  Recommended-Tip range:17-21 mm;Total fluid pressure:15-20MPa        Brush or Roller:  Recommended,only for small area        Conventional Spray:  Adoptable but thin to 5-10%,Tip range:2-2.5mm Thinner   X-13 Storage Life  One year Drying Time(Substrate Temperature 25ºC)          Touch Dry  ≤2h       Hard Dry   ≤8h         Overcoating Interval:Minimum   8h    Maximum   No limit Painting number  Suggest two coats of painting, dry film reaches 70-80μm Storage and  Handlina Storage : Store in cool and dry conditons Pack Size  20 kg Flash Point   25ºC Specific Gravity  Approx 1.00-1.25Kg/L Specification and Surface Preparation If preceding paint has been polluted, appropriate methods shall be used to remove grease and dust, and this lacquer diluent also can be used to clean. Preceding paint Chlorinated rubber aluminum powder high-build anti-rust paint, chlorinated rubeber iron oxide red high build anti-rust paint and epoxy micaceous iron oxide anti-rust paint, etc. Limitations Substrate temperature must be 3ºC higher than dew point above, and relative humidity must be less than 85%. Safety Precautions This product should be used in painting area by professional operators.When painting, please refer to Product Data Sheet and MSDS.Consult our company if consumers could not completely understand the precautions for safety and health when applying this product. This product is a kind of solvent-based paint.ln order to avoid danger or accident, minimal safety precautions, as follow, should be done: The paint contains volatile solvent and is flammable.So must keep away from sparks and open flames.No smoking at application site.Effective precautions(such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc)also should be done so as to avoid producing sparks.Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air. Enough ventilation is necessary at application site.ln order to remove any danger of explosion,must keep the ratio of gas to air is less than 10% ,the minimum explosive limit in generaLTherefore,200m³ of ventilation quantity per 1 Kg solvent(according to the solvent)is necessary. Protect skin and eyes, and avoid touching with paints(Recommend to wear working clothes, gloves eye protection, face masks, barrier creams and so on).If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner.ln case of eyes being contaminated,  rinse with fresh water for 10min at least and give medical treatment immediately. Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas,especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination. NOTICE: If consumers have not taken effective safety precautions(Refer to the specifications), our company will NOT be responsible for any accident.