Technical data
Machine model: SL-720
Power: 3kw/three-phase380V
Rate of flow: 0-20L/min
Gravel size: Within 4mm
Rotating speed: 0-1300rpm
Pressure: 40kg
Weight: 180kg
Length: 1500mm
Width: 730mm
Height: 850mm
Product characters:
1. Leak resistance and leak stopping projects: Suitable for expansion joint/movement joint leaking, settlement joint leaking, metro leaking, tunnel leaking, mine leaking, dam leaking and other leak resistance and leak stopping projects.
2. Structure strengthening projects: Suitable for terrace hollow, crack strengthening, bridge strengthening and other strengthening projects.
3. Waterproofing spraying projects: Suitable for indoor and outdoor spraying, cement mortar spraying, dry powder mortar spraying, putty powder spraying, waterproofing material and waterproofing surface spraying, ceiling spraying, wall spraying, coating/painting spraying, gardening spraying, relief effect coating, art and craft spraying, emulsion paint, stone-like paint, manmade rock spraying, carving and sculpture spraying, damping material spraying and other spraying projects.
Spraying operation instructions:
1. Pore some clean water into the material barrel before starting up, the rotating speed should be adjusted to middle high speed, so that it can make the hose wet. Continuing for a short time, then drain the clean water.
2. Put the material(mixed evenly first) into the material barrel, then lock the hose and joint with the spraying machine tightly.
3. Before spraying, the pressure of the air compressor should reach 8kg(the matching air compressor should be 0.26-0.36m), then lock the spraying nozzle.
4. Switch on, put the spraying nozzle against the material barrel, then adjust the pressure of air compressor and the rotating speed of the spraying machine to make the spray pattern better. Then switch off the spraying machine leave the air compressor on.
5. After adjusting the spray pattern, move the spraying nozzle to the construction places.
6. The hose is full of material when it is running, so it is not good to let the spraying machine off for a long time. If power failure happens, the hose should be taken down immediately.
7. If the pressure in the hose is high, cover a piece of cloth on it before take it down to protect your eyes.
8. When you are failed to start up the spraying machine, please check the electrical driving drill to see if it is burned out. If the electrical driving drill is burned out, replace it with a new one.
9. When cleaning the spraying machine with water, do not wet the electrical driving drill or electrical controlling box. Otherwise it may be damaged.
10. Clean the material barrel, hose, spraying nozzle and joint after work.
11. After using for a long time, the pressure pump may wear out. The one pressure pump need to be replaced with a new one.
12. If it doesn't work suddenly while the electrical driving drill is still on, then the spraying nozzle is blocked. Switch off the spraying machine and clean the spraying nozzle and then continue the work.
13. Spraying nozzle is a wearing part, standard spraying hole is 4mm, if the spraying effect is not good, replace the spraying nozzle.
Shengchong Waterproof Material Co., Ltd. Specializes in producing injection/grouting pump, injecting steel pith pinheads/grouting injection packers, waterproof polyurethane grout and other waterproof materials. The headquarter locate in Taiwan. The factory is in Shanghai, China. There are many branches other cities.
The address is No. 649, Guangzhou Avenue North, Guangzhou, Guangdong, China. Gluangzhou Branch is mainly selling injection pump and accessories, grouting injection packers, waterproof poluurethane and other waterproof materials.
