Water Purifier for Textile Effluent
| Price: |
US $ 800-880/Ton |
| Trade Terms: |
FOB,CFR,CIF |
| Min Order: |
1/Ton |
| Pay Type: |
L/C,T/T,Western Union |
Our BWD-01 water decoloring agent is mainly used for water purifer for textile effluent, dyestuff printing and washing wastewater.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: 50% MIN
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Advantage:
1, Biggest manufacturer and supplier of decoloring polymers in the world
2, More than 10 yeasrs experience in production and 15 years experience in water treatment
3, Professional technical service team(8 engineers) to help you
4, Have reserved sample more than 1 year for quality tracking
5, Automatic control during the production, keep quality good and stable.
6, General chemical, harmless, no-flammable and non-explosive
Application range:
A) Textile effluent
B) Dyeing&Washing wastewater
C) Paper making wastewater
D) Chemical wastewater
E) Other wastewater
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water directly
B) PH index of the waste water should be adjusted to 7 - 10 for better result
C) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment process
Storage:
Can be stored at room temperature, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01Water Decoloring Agent:
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. About 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Bluwat Chemicals is a professional supplier of water treatment chemicals in China. Our core products are coagulants and flocculants for the treatment of water.
We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next.
| Prod Model: |
BWD-01 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| CAS: |
55295-98-2 |
| Type: |
Dicyandiamide Cationic Resin Polymer |
| Usuage: |
Water Purifier for Textile Effluent |
We are a leading water treatment chemicals company and we are supplying many kinds of chemicals for drinking water treatment and wastewater treatment.We have a lot of experience on production and application of water treatment chemicals.
Our main water treatment chemicals products are as follows:
Poly Aluminum Chloride (PAC), for drinking water treatment and wastewater treatment.
BWD-01 Water Decoloring Agent, for color removal for dying wastewater and for other wastewater.
Anionic Polyacrylamide(PAM)/Polyelectrolyte, for water treatment and sludge treatment.
Ferric Sulphate, for drinking water treatment and wastewater treatment.
PolyDADMAC, for water treatment and paper mills.
And other chemicals used for water treatment.
We supply high molecular weight Partially hydrolyzed polyacrylamide (PHPA) for oil/gas drilling additives and EOR process, we have big market in China and some foreign countries.We also supply CMC and PAC for drilling.
We are exporting our products to our customers in Europe, USA, and some Asian countries for many years.
